226
edits
Changes
Modbus TCP Master MQTT Gateway (view source)
Revision as of 12:57, 11 July 2022
, 12:57, 11 July 2022adjusted image size
# Press '''Save & Apply'''
# Press '''Save & Apply'''
[[File:Networking MQTT MODBUS flespi configuration slave1 v1.png|border|center|1171x1171px|*In this config LAN port is used so “Allow Remote Access” is not needed Modbus TCP Slave RUT955 is now configured.
[[File:Networking MQTT MODBUS flespi configuration slave1 v1.png|border|center|1120x1120px|*In this config LAN port is used so “Allow Remote Access” is not needed Modbus TCP Slave RUT955 is now configured.
]]
]]
''*In this config LAN port is used so “Allow Remote Access” is not needed''
''*In this config LAN port is used so “Allow Remote Access” is not needed''
#Press Test button in Request Configuration Testing to see if Slave device respond to requests, response similar to image below should be shown.
#Press Test button in Request Configuration Testing to see if Slave device respond to requests, response similar to image below should be shown.
#Press Save & Apply
#Press Save & Apply
[[File:Networking MQTT MODBUS flespi configuration master add v1.png|border|center|1197x1197px]]
[[File:Networking MQTT MODBUS flespi configuration master add v1.png|border|center|1136x1136px]]
[[File:Networking MQTT MODBUS flespi configuration master afteradd step 234567 v1.png|border|left|757x757px]]
[[File:Networking MQTT MODBUS flespi configuration master afteradd step 234567 v1.png|border|left|736x736px]]
[[File:Networking MQTT MODBUS flespi configuration master req config8up v1.png|border|center|1151x1151px|
[[File:Networking MQTT MODBUS flespi configuration master req config8up v1.png|border|center|1111x1111px]]
[[File:Networking MQTT MODBUS flespi configuration master req testing v1.png|center|1109x1109px]]
]]
[[File:Networking MQTT MODBUS flespi configuration master req testing v1.png|center|1154x1154px]]
