226
edits
Changes
Modbus TCP Master MQTT Gateway (view source)
Revision as of 13:02, 11 July 2022
, 13:02, 11 July 2022image test 1
# Press '''Save & Apply'''
# Press '''Save & Apply'''
[[File:Networking MQTT MODBUS flespi configuration slave1 v1.png|border|center|1120x1120px|*In this config LAN port is used so “Allow Remote Access” is not needed Modbus TCP Slave RUT955 is now configured.
[[File:Networking MQTT MODBUS flespi configuration slave1 v1.png|border|1120x1120px|*In this config LAN port is used so “Allow Remote Access” is not needed Modbus TCP Slave RUT955 is now configured.
]]
|alt=|left]]
''*In this config LAN port is used so “Allow Remote Access” is not needed''
''*In this config LAN port is used so “Allow Remote Access” is not needed''
#Press Test button in Request Configuration Testing to see if Slave device respond to requests, response similar to image below should be shown.
#Press Test button in Request Configuration Testing to see if Slave device respond to requests, response similar to image below should be shown.
#Press Save & Apply
#Press Save & Apply
[[File:Networking MQTT MODBUS flespi configuration master add v1.png|border|center|1136x1136px]]
[[File:Networking MQTT MODBUS flespi configuration master add v1.png|border|1136x1136px|alt=|left]]
[[File:Networking MQTT MODBUS flespi configuration master afteradd step 234567 v1.png|border|left|736x736px]]
[[File:Networking MQTT MODBUS flespi configuration master afteradd step 234567 v1.png|border|left|736x736px]]
[[File:Networking MQTT MODBUS flespi configuration master req config8up v1.png|border|1111x1111px|alt=|left]]
[[File:Networking MQTT MODBUS flespi configuration master req testing v1.png|1109x1109px|alt=|border|left]]
==Configuring Flespi.io MQTT Broker==
