Teltonika Networks Wiki

Changes

Modbus data to server via MQTT TLS (view source)

Revision as of 14:17, 6 September 2023

41 bytes added ,  14:17, 6 September 2023
m
no edit summary
Line 21: Line 21:  
# Select Protocol '''“MODBUS TCP/IP”.'''
 
# Select Protocol '''“MODBUS TCP/IP”.'''
 
# Click '''“Setup the communication Serial or TCP/IP port”''' button.
 
# Click '''“Setup the communication Serial or TCP/IP port”''' button.
 +
[[File:Ken Picture5.png|left|thumb]]
            −
# Take note of the '''“Port”'''
+
 
−
# Click '''“OK”''' to close the menu
+
3. Take note of the '''“Port”'''
−
#
+
 
−
# Configure the static IP address of the Windows 10 Computer to match the one in the topology.
+
4. Click '''“OK”''' to close the menu
−
#
+
 
−
# Change some values in different register of the '''modRSsim2''' application as shown below:
+
5. Configure the static IP address of the Windows 10 Computer to match the one in the topology.
 +
 
 +
6. Change some values in different register of the '''modRSsim2''' application as shown below:
    
===Configuring Modbus TCP/IP Master===
 
===Configuring Modbus TCP/IP Master===
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/110958"