Changes

# Select Protocol '''“MODBUS TCP/IP”.'''

# Select Protocol '''“MODBUS TCP/IP”.'''

# Click '''“Setup the communication Serial or TCP/IP port”''' button.

# Click '''“Setup the communication Serial or TCP/IP port”''' button.

[[File:Ken Picture5.png|left|thumb]]

# [[File:ModRSim2 test1.png|left|thumb]]

 

 

 

 

 

# Take note of the '''“Port”'''

3. Take note of the '''“Port”'''

# Click '''“OK”''' to close the menu

 

# Configure the static IP address of the Windows 10 Computer to match the one in the topology.

4. Click '''“OK”''' to close the menu

# Change some values in different register of the '''modRSsim2''' application as shown below:

 

5. Configure the static IP address of the Windows 10 Computer to match the one in the topology.

 

6. Change some values in different register of the '''modRSsim2''' application as shown below:

===Configuring Modbus TCP/IP Master===

===Configuring Modbus TCP/IP Master===