Changes

[[File:Rmsdevicedetails1.png|border|class=tlt-border|1100px]]

[[File:Rmsdevicedetails1.png|border|class=tlt-border|1100px]]

*In the left upper corner you can see an action menu on this specific device, it's the same menu as on the Devices page when any device is selected.

*On the left side, general device information will be listed, left to the device picture there are actions to connect to WebUI, CLI and force update device information.

*In the right upper corner you can update/refresh details on this device, view details on a specific date or view history on any selected parameter, and view the device introduction.

*Above the general device info you can see an action menu on this specific device, it's the same menu as on the Devices page when any device is selected.

*In the middle you will see general information about the device and its status.

*Below action menu you can select various section which will display metrics, details according to the selected section.

*In the lower area you will see other information depending on the selected tab.

*In the middle you will see logs, event lists, metrics, location and other services by the selected section above.

----

----

[[File:Rmsdevicedetails4.png|border|class=tlt-border|300px]]

[[File:Rmsdevicedetails4.png|border|class=tlt-border|300px]]

#Information about the selected product, and its connection status. You can also change its name, and description, or connect to its WebUI, CLI.

#Buttons to connect to the device's WebUI, CLI and force update device information.

#Current system usage, serial number, current firmware version, temperature.

#General  information - serial number, MAC, IMEI, firmware, monitoring status, and list which parameters are being monitored.  

#Ethernet ports status - their current usage, speed, duplex type.

#Network information - lists mobile status, used SIM slot, ethernet port status, Main WAN connection type, WAN IP address.

#Mobile status - current SIM status, signal strength, operator, and data usage.

#Device information - lists uptime, CPU, RAM, Flash usage, current temperature and modem model.

#Periodic backups - their frequency, enabled/disabled status, and periodic backup files.

==General==

==General==