RMS Device Details

Main Page > IoT Platforms > RMS > RMS Manual > RMS Management > RMS Devices > RMS Device Details

Summary

Here you can see all the details and metrics of the device, various logs. Also, other features that were configured on RMS regarding the selected device will be shown here.

Note: you can get here by clicking on icon in the device list in the Actions column.

Overview

Here you can see the UI of the Device details page:

On the left is the main Actions button and following it are various tabs that provide specific information and metrics about the selected device.
Shows general device information.
Shows recent device events.
Shows various files that were recently exported from the device.
Shows the logs of recently executed tasks via RMS Task Manager.
Shows the logs of recent device configuration changes and other device network events.

General

In this tab you check general information about the selected device.

Buttons to connect to the device's WebUI, CLI and force a device information update.
General information - serial number, MAC, IMEI, firmware, monitoring status, and the number of parameters being monitored.
Network information - mobile status, used SIM slot, ethernet port status, WAN connection type, WAN IP address.
Device information - device uptime, CPU, RAM, Flash usage, current temperature and modem model.

Below the top table you can find various logs about the device:

Shows recent RMS system events regarding the device. Such as when the device was added, changes to RMS monitoring services, when RMS resources were assigned to the device, and so on.
Shows various files that were recently exported from the device.
Shows the logs of recently executed tasks via RMS Task Manager. Also, you can press on the task name to view its details. Such as CLI commands responses and so on.
Shows the logs of recent device configuration changes and other network level events.

Monitoring History

Here, you'll be able to view the data collected by your enabled monitoring templates over a chosen time period.

To view a desired monitoring template's data:

Select a date range.
Select a template to get a list of monitored parameters.

Once the template is selected, you can then choose to view By template or By parameter. In By template view, you will see all parameter section's values at the selected timestamp. While in By parameter view, you will see a specific parameter's values over a selected date range

View by template

Instructions

Select By template.
Select the timestamp to view monitored parameter values at that time.
Select a monitored parameter section/group.
On the right side you will see parameter values at the selected time.

View by parameter

Instructions

Select By parameter.
Select a monitored parameter section/group.
Select specific parameter.
On the right side you will see selected parameter's values during the selected date range.

Dashboards

Dashboards allow you to visualize collected monitoring data in an easy-to-read and visually appealing format.

Overview

Create a new dashboard template.
Filter your created dashboards.
Search for a dashboard using.
View the actual dashboard.

By pressing the edit button you can quickly view which widgets the dashboard is using, change its name, auto refresh interval.

Viewing a dashboard

After selecting a dashboard, you'll be able to view data from various widgets, create new widgets, and modify existing ones.

Save or cancel recent changes to the dashboard.
Add a widget to the dashboard.
Drag the widget, edit the widget, and remove it from the dashboard.
Select the timeframe from which the dashboard will display all of the gathered data.
Perform a quick dashboard data refresh.

Adding new dashboard widget

Press the + Add widget button
Select a group of widgets
Select a specific type of widget

Depending on the selected widget you will see various parameters for the widget.
After you are done customizing the widget, press the Save button.

New widget example

Let's create a widget to monitor mobile parameters (RSRP, RSRQ, SINR, and mobile signal).

Press the + Add widget button
Select Charts and Line chart
Select Dynamic monitoring as Monitoring template
Select your desired parameters. In this case, we need RSRP, RSRQ, SINR, and mobile signal.
Press Save to create the widget and add it to your dashboard.

You can do some visual changes to the widget. For example, you can set custom colors, line chart's stroke width, or select measurement units for each parameter.

Note: when making changes to the widget, you can press the Preview button to quickly view changes without actually saving them.