RUT200 Cloud Solutions

From Teltonika Networks Wiki
Revision as of 15:05, 13 January 2022 by Gytispieze (talk | contribs) (Gytispieze moved page Draft:RUT200 Cloud Solutions to RUT200 Cloud Solutions without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT200 > RUT200 Manual > RUT200 WebUI > RUT200 Services section > RUT200 Cloud Solutions

The information in this page is updated in accordance with firmware version RUT2M_R_00.07.09.4.


Summary

The Cloud Solutions section is used to configure how the device will connect to certain cloud management systems.

This chapter of the user manual provides an overview of the Cloud Solutions page for RUT200 devices.

Note: Each Cloud Solutions service, except RMS, is additional software that can be installed from the System → Package Manager page.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

RMS

RMS (Remote Management System) is a cloud system designed by Teltonika and intended for remote monitoring and management of Teltonika-Networks products.

In order to add a device(s) to RMS, get yourself acquainted by watching this instructional video and register an account by clicking here. Each unique device receives a free month-long RMS license when added to RMS for the first time.


The figure below is a screenshot of the RMS section taken from a device which has been connected to RMS:

Networking rutos manual setup wizard rms mac v5.png

Field Value Description
Connection type Enabled | Standby | Disabled; default: Enabled Defines how the device will connect to RMS:
  • Enabled - the device attempts to connect to RMS every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If it cannot connect for 14 days, it will enter Standby mode.
  • Standby - the device attempts to connect to RMS every 6 hours.
  • Disabled - RMS functionality is disabled.
Hostname host | ip; default: rms.teltonika.lt Address of the RMS server. If you're using regular RMS, just leave the default address (rms.teltonika.lt).
Port integer [0..65535]; default: 15009 Port number for connecting to RMS. If you're using regular RMS, just leave the default port (15009).
Authentication code string; default: none Authentication code provided by RMS after adding the device.



The RMS server waits for incoming connections. Since the device attempts to connect at a fixed interval, it may not connect instantly after you add it to RMS. While it is disconnected, you can check how much time is left until the next connection attempt in the Status section:

Networking rutos manual cloud solutions rms disconnected rms mac v5.png

To speed up the process by initiating an immediate connection attempt, click the Connect button.

Networking rutos manual cloud solutions rms connect mac v3.png

If a failure or unknown status occurs, there is an alternative to try to reconnect again, click the Reconnect button.

Networking rutos manual cloud solutions rms reconnect mac v3.png

When the device is already connected a Reset button becomes visible. Use it to terminate the device's connection to RMS.

Networking rutos manual cloud solutions rms unregister mac v3.png

For more information on Teltonika Networks Remote Management System (RMS) refer to the RMS Manual or RMS FAQ pages.

Azure IoT Hub

Azure IoT Hub is Microsoft's ever-expanding set of cloud services to help your organization meet your business challenges. Azure IoT Hub is compatible with Teltonika Networks devices.

By default, the Azure IoT list is empty. To add a new connection, enter a custom name and click the 'Add' button.

Networking rutos manual cloud solutions azure iot hub add.png

Modify Azure IoTHub

Networking rutos manual cloud solutions azure iot hub modify.png

Field Value Description
Enable off | on; default: off Enable Azure IoT service.
Name string; default: none Connection name.
Enable Direct Methods off | on; default: off Enable Direct Method feature set.
Device Model ID string; default: dtmi:Teltonika:genericDevice;1 Model ID of the Digital Twins Definition Language.
Connection type Shared Access Signature (SAS) key | Device Provisioning Service (DPS); default: Shared Access Signature (SAS) key Connection type to an existing IoT Hub.
Connection String string; default: none Connection string based on primary key used in API calls which allows device to communicate with IoT Hub.
ID Scope string; default: none Unique identifier that is assigned to an Azure IoT Hub during its creation and is used to uniquely identify the specific provisioning service the device will register through.
Registration ID string; default: none The registration ID is used to uniquely identify a device registration with the Device Provisioning Service.
Global Device Endpoint string; default: global.azure-devices-provisioning.net Destination for messages sent by IoT devices to the Azure IoT Hub.
Attestation mechanism X.509 certificates | Symmetric Key; default: X.509 certificates Method used to confirm a device's identity in Device Provisioning Service.
X.509 Certificate -interactive button; default: Upload the "leaf" certificate file.
X.509 Private Key -interactive button; default: Upload the "leaf" key file.
Symmetric Key string; default: none The the derived device key from the DPS Primary Key.

Cloud of Things

The Cloud of Things is an IoT cloud platform which provides the possibility to remotely monitor, manage and control your connected devices and machines – plug-and-play, without extensive installation.

Networking rutos manual cloud solutions cloud of things v1.png

Field Value Description
Enable off | on; default: off Turns the Cloud of Things service on or off.
Server Address ip | host; default: none Cloud of Things server IP address or hostname.
Interval integer; default: none Push connection interval in minutes.
Reset Auth - (interactive button) Resets authentication data so that device could be re-registered on the Cloud of Things Device Management platform.

Cumulocity

Cumulocity IoT is a cloud-based, real-time IoT management platform that's also compatible with Teltonika-Networks devices.

The figure and table below provide explanations for Cumulocity configuration parameters available on the device. For a detailed configuration guide, click here.

Networking rutos manual cloud solutions cumulocity v1.png

Field Value Description
Enable off | on; default: off Turns the Cumulocity service on or off.
Use SSL/TLS off | on; default: off Turn SSL/TLS protocol support on or off.
Server Address host; default: none Hostname of your Cumulocity server. It should match the Environment name from the Cumulocity registration.
For example: teltonika-networks.eu-latest.cumulocity.com
Interval integer; default: none Connection push interval in minutes. This field defines how often the device will try to connect to the Cumulocity server.
Reset Auth - (interactive button) Resets authentication for this device. If you click this, you'll have to authorize this from Cumulocity dashboard before it can successfully connect to the server.

ThingWorx

Networking rutos manual cloud solutions thingworx modem 1.png

Field Value Description
Enable off | on; default: off Turns the ThingWorx service on or off.
Server Address ip | host; default: none Thingworx server IP address or hostname.
Server Port integer [0..65535]; default: none Thingworx server's port number.
Thing Name string; default: none Thing name defined in ThingWorx CP.
Application Key string; default: none Application key generated in ThingWorx CP.
Mobile Interface network interface; default: mob1s1a1 Interface whose GSM parameters will be sent to the ThingWorx server for monitoring.