RUT200 TR-069

The information in this page is updated in accordance with firmware version RUT2M_R_00.07.04.3.

Summary

TR-069 (Technical Report 069) is an application layer protocol designed for management of equipment connected to a remote network.

This chapter of the user manual provides an overview of the UPnP page in RUT200 devices.

---

TR-069 is additional software that can be installed from the Services → Package Manager page.

TR-069 Client Configuration

Field	Value	Description
Enable	off | on; default: off	Turns TR-069 client on or off.
Periodic enable	off | on; default: on	Turns periodic data transmissions to server on or off.
Accept server request	off | on; default: off	When enabled the device accepts connection requests from servers.
Sending interval	integer [60..9999999]; default: 100	Periodic data transmission frequency (in seconds).
Username	string; default: easycwmp	Username used for authentication to a TR-069 server.
Password	string; default: easycwmp	Password used for authentication to a TR-069 server.
URL	host | ip; default: http://192.168.1.110:8080/openacs/acs	IP address or hostname of a TR-069 server.

Management via TR-069

TR-069 can be used to set or get values from RUT devices. Below is a list of commands used for device management via TR-069.

• R - read only;
• RW - read/write;
• string(64) - 64 bit string;
• string(256) - 256 bit string;
• unsignedInt - integer storing only positive values.

---

Device Information:

1. DeviceInfo.Manufacturer - device manufacturer (e.g., Teltonika) R
2. DeviceInfo.ProductClass - device model (e.g., RUT200) R
3. DeviceInfo.SerialNumber - device serial number (e.g., 1000111111) R
4. DeviceInfo.UpTime - device uptime R;

---

Mobile Information:

1. MobileInfo.ICCID - SIM ICCID R;
2. MobileInfo.Operator - name of operator used R;
3. MobileInfo.SentThisMonth - bytes sent this month R;
4. MobileInfo.ReceivedThisMonth - bytes received this month R;