RUT230 Profiles (legacy WebUI)

From Teltonika Networks Wiki
Revision as of 13:19, 18 November 2021 by Gytispieze (talk | contribs) (Gytispieze moved page Draft:RUT230 Profiles (legacy WebUI) to RUT230 Profiles (legacy WebUI) without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT230 > RUT230 Manual > RUT230 Legacy WebUI > RUT230 System section (legacy) > RUT230 Profiles (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT2XX_R_00.01.14.7.

Notice: This device has entered it's EOL (End of Life) cycle. For more information, visit our EOL policy here. Temporarily, some content in this page might not match features found in firmware listed above.

Note: this user manual page is for RUT230's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary

Profiles provides a way to create multiple distinct router configuration sets and apply them to the router based on current user requirements.

This chapter of the user manual provides an overview of the Profiles page for RUT230 devices.

General

This section displays user defined profiles and provides the possibility to add new ones. To create a new profile, enter a custom name for the profile and click the Add button.

Networking rut2xx manual profiles configuration profiles v1.png

Note: Profiles can be switched with SMS Utilities, Input/Output functions or via this page.

Scheduler

The Profile Scheduler provides a possibility to set up a schedule of when the router should use one configuration or another. Different configuration profiles use differently colored dots for distinction. Select a profile from the dropdown below and click on time interval boxes in the scheduler table to indicate on which days/hours the profile should be applied.

Networking System Profiles Scheduler V1.PNG