RUT240 Services (legacy WebUI)

From Teltonika Networks Wiki
Revision as of 12:41, 18 November 2021 by Gytispieze (talk | contribs) (Gytispieze moved page Draft:RUT240 Services (legacy WebUI) to RUT240 Services (legacy WebUI) without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > RUT240 > RUT240 Manual > RUT240 Legacy WebUI > RUT240 Status section (legacy) > RUT240 Services (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT2XX_R_00.01.14.7.

Note: this user manual page is for RUT240's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary

The Services page is used for easy service management. From here you can monitor your device's services states. Click a button to access respective section where it was originally configured.

This chapter of the user manual provides an overview of the Services page for RUT240 devices.

Services

The Services page displays the status of most of the device's services. Services that are currently inactive are displayed in a red font, while active ones are highlighted in green.

The figure below is an example of the Services page:

Click the zone next to a service where it says "Change settings" and you will redirected to configuration page.

Additional notes: