RUT361 Firmware Downloads

From Teltonika Networks Wiki
Revision as of 09:49, 6 May 2024 by Gytispieze (talk | contribs) (Text replacement - "*** Mobile: fixed PIN code set after modem restart *** Mobile: fixed cases where 5G NSA network type was shown incorrectly *** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection" to "*** Mobile: fixed PIN code set after modem restart *** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection")

Main Page > RUT Routers > RUT361 > RUT361 Firmware Downloads

This page contains firmware files for RUT361 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUT361 Firmware.


File Type Release date Size MD5 Changelog
RUT361_R_00.07.07.2_WEBUI.bin Latest FW 2024.06.12 11.44 MB 6d465a094d990f78e7b3b354180cb018 Link
RUT361_R_00.07.06.10_WEBUI.bin Mass production FW 2024.04.04 11.19 MB 5b73a84646c8c33ede8a7d6795602e92 Link
RUT361_R_GPL_00.07.07.2.tar.gz SDK 2024.06.12 20.66 MB cc919e3414ea93c9b9867f0b5ad95add

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.

FW checksums

Checksums for firmware files can be found here.


RUT361_R_00.07.07.1 | 2024.05.03

  • New
    • Network
      • WebUI: added ESM/EMM message notifications
      • WebUI: added internet status tracking configuration and overview widget
      • LAN: added a new IPv6 LAN status page
      • Static Leases: added a new IPv6 Static Leases page
      • WebUI: added custom domain name resolve option in “DNS” configuration page
      • Auto APN: added “” APN for “KDDI” operator
      • Auto APN: added '' APN for “Sparkle” operator
      • QoS: added mobile interface select option
      • Mobile: improved connection establish time for uqmi protocol
      • Failover: added additional connection flush options
      • Wireless: added auto-reconnect disable functionality
      • Wireless: added ability to use PKCS#12 certificates for EAP-TLS authentication
      • VRF: added initial Virtual Routing and Forwarding support
    • Services
      • Post/Get: added I/O invert support
      • DLMS Client: added persistent TCP connections
      • Events Reporting: added unexpected shutdown event
      • Modbus Client: added 64bit data types
      • IPerf3: added iPerf3 to Package Manager
      • DNP3 Outstation: added I/O objects
      • TR-069: added PCI, LAC, TAC, EARFCN and Neighbour cells data to Device.MobileInfo node
      • Hotspot: added domain and subdomain options for external landing page
    • System
      • WebUI: added the ability to generate random passwords for password input fields
      • WebUI: added reset to “Factory defaults” option
      • System: changed firmware certificate verification tool
      • IP Block: added time-based login attempt blocking
      • WebUI: added firmware update notification support
      • PAM: added the ability to set port for TACACS+
      • Logging: added multiple remote syslog servers support
  • Improvements
    • Network
      • Static Leases: added possibility to use MAC with wildcard
      • WebUI: added ability to disable modem update notifications
      • Topology: changed network devices scanning application
      • WebUI: improved design of Status - LAN page
      • DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
      • DHCP: removed default disabled server configuration for WAN interface
      • WebUI: simplified data entry of DNS forwardings by separating hostname and IP address fields
      • BGP: added Virtual Routing and Forwarding (VRF) support
      • BGP: added multiple BGP instance support
      • WebUI: adjusted responsive design breakpoints
      • WebUI: added additional field for warning threshold to allow entering value as percentage in Mobile Data Limit section
      • Mobile: improved mobile services stability when SIM card is lost during SMS sending
      • Mobile: updated bridge/passthrough mode logic to flush ARP and add static ARP entry if MAC is specified
      • Mobile: improved SIM switch logging and protection on failure to acquire data
      • MWebUI: added partial data loading to APN database page
      • Mobile: improved SMS sending timeouts during network issues
      • Mobile: improved connection handling when data limit is reached
      • Mobile: added metric to default gateway when using passthrough mode
      • WebUI: added validation for 2 same APNs
      • WebUI: updated Band selection field to show duplex modes in Mobile General page
      • WebUI: added an information icon and disabled delete button for wireless instance when it is associated with a hotspot interface
      • Wireless: improved hidden AP handling when showing scan results
      • Dnsmasq: updated dnsmasq to version 2.89
    • Services
      • Wireguard: added option to bind tunnel to a specific interface
      • OPC UA Client: added limits (10 servers, 20 groups, 50 nodes per server, 50 values per group)
      • DLMS Client: increased maximum count of connection sections to 30
      • DLMS Client: added short name referencing
      • SNMP: set strict default community access when IPv6 address is used
      • SNMP: improved sysName OID to set device's hostname
      • Auto Reply: added available SMS message parameters to "Message text" input
      • Modbus Client: allow using diacritics in SMS alarms
      • Hotspot: moved MAC blocking option from Access Control to Hotspot page
      • WebUI: added MAC authentication support when using RADIUS authentication mode
      • WebUI: moved licenses to footer
      • OpenVPN: added the bridge option for selecting the network device to be bridged with
      • OpenVPN: added possibility to create more than one TAP client
      • SSTP: updated package version to 1.0.19
      • Mosquitto: updated package version to 2.0.17
    • System
      • WebUI: added more strict password requirements for restoring backup
      • SMTP: added option to either not verify SMTP server or upload SMTP server's CA file to verify authenticity
      • WebUI: Added the ability to choose the ROOT CA when using certificates from the device
      • WebUI: unified time format to ISO8601 across the entire WebUI
      • WebUI: added ability to choose imported certificate and key as 'Server certificate' and 'Server key' in 'Access Control'
      • WebUI: added 'Hosts' and 'IP Addresses' options for 'Simple' certificate generation and certificate signing
      • WebUI: changed firmware update option to server as a default option
      • WebUI: improved first login password change logic
      • Certificates: updated Root CA certificates
      • GPL: added offline package preparation command for GPL builds
      • Speedtest: added multiple connections support to improve accuracy
      • Kernel: updated to version 5.15.149
      • Libcap: updated package version to 2.69
  • Fix
    • Network
      • Topology: fixed showing interfaces with assigned VLAN
      • WebUI: fixed static routing creation for GRE instance
      • Network: fixed DHCPv4 relay mode enabling
      • Mobile: fixed PIN code set after modem restart
      • Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection
      • Mobile: fixed an issue where message storage would not be checked correctly
      • Mobile: fixed temperature value sometimes returning 0
      • Mobile: fixed denied roaming flag set
      • Failover: fixed Failover missing active rules when using multiple source and destination IP addresses
      • Failover: fixed an issue where failover would not function correctly while using a mobile interface
      • WebUI: fixed network and failover interface metric sorting synchronization issue
      • WebUI: fixed failover rule policy save issue with newly added WAN interface
      • Interfaces: fixed failover value for new WAN being taken from WAN that was just deleted
      • Wireless: fixed Wifi Scanner not saving scanned WiFi SSIDs
      • Wireless: fixed missing CCMP-256 and GCMP-256 cipher types in scan results
      • Wireless: fixed missing GCMP-256 cipher when using WPA3-EAP encryption in Client mode
      • Wireless: fixed skipped MAC address value for interface in Client mode
      • Wireless: fixed scanning issue when connected via the same network
      • Wireless: fixed mesh functionality
      • Wireless: fixed missing signal strength value on Client interfaces
      • Wireless: fixed Client interface taking excessive time to connect after boot
      • Wireless: fixed missing EAP authentication in Client mode
      • WebUI: fixed mesh nodes not being shown in Status->Wireless->Interfaces page
      • WebUI: fixed proposed configuration settings when connecting to a mesh point network
      • Wireless: fixed connected wireless clients being shown duplicated
      • MultiAP: fixed client not switching to another AP if incorrect password was provided
    • Services
      • Modbus Client: allow using negative floating point values in requests
      • Azure IoT Hub: fixed Data to Server minor WebUI dependency bugs
      • Data to Server: fixed DLMS data formating
      • Data to Server: fixed Network link state data display
      • DLMS Client: fixed segfault while reading profile generic COSEM object
      • DLMS Client: fixed profile generic entries reading
      • DLMS Client: fixed application memory allocation issues
      • SSTP: fixed route adding when default route is enabled
      • SNMP: fixed VLAN OID naming
      • OpenVPN: added fixes for instance status tracking functionality
      • OpenVPN: resolved uptime counting issues
      • Azure IoT Hub: fixed 'contentType' telemetry message parameter
      • Hotspot: fixed password validation for locally created users and signed-up users
      • Hotspot: fixed session invalidation after deleting registered user
      • Hotspot: fixed SMS OTP password reuse
      • Hotspot: fixed firewall rule creation
      • PPTP: fixed problem related with routes when failover is enabled
      • Modbus Client: fixed issue where service freezes when SMS alarm is sent
      • WebUI: fixed data loading error in Input/Output > Post/Get page
      • PPTP: fixed PPTP instance deletion problem
      • UPnP: updated package version to 2.3.4
    • System
      • NTP Client: fixed ‘Count of time synchronizations’ execution when synchronization to mobile operator is chosen
      • Package Manager: fixed spinner message when restarting network after package upload or download
      • Package Manager: fixed supported devices check when installing a package from server
      • WebUI: fixed language install from uploaded package after upgrade with keep settings
      • WebUI: fixed an issue when a user was not logged out after changing profiles
      • Telnet: fixed segmentation fault during concurrent connections
      • CLI: fixed enter key issue on mobile chromium based browsers
      • System Users: fixed SSH session close after deleting user or disabling SSH access
      • Profiles: fixed profile migration with installed packages
      • WebUI: fixed Hotspot log page table search functionality
      • Speedtest: fix missing download speed on some servers
      • PAM: updated libpam to version 1.6.0
  • CVE Patches
    • CVE-2022-4603
    • CVE-2022-23308
    • CVE 2022-45061
    • CVE-2023-0466
    • CVE-2023-6129
    • CVE-2023-7042
    • CVE 2023-24329
    • CVE 2023-27043
    • CVE-2023-42366
    • CVE-2023-46218
    • CVE-2023-46219
    • CVE-2023-46752
    • CVE-2023-46753
    • CVE-2023-48795
    • CVE-2024-2397
    • CVE-2024-25062
    • CVE-2024-27913
    • CVE-2024-22365

RUT361_R_00.07.06.10 | 2024.04.04

  • Global changelog for R_00.07.06.10 - LINK

RUT361_R_00.07.06.8 | 2024.03.25

  • Firmware R_00.07.06.8 was removed due to an issue with inefficient memory allocation for LED control.

RUT361_R_00.07.06.6 | 2024.03.04

  • Global changelog for R_00.07.06.6 - LINK

RUT361_R_00.07.06.5 | 2024.02.21

  • Initial FW release for the RUT361 device