View source for RUT955 Inverting Relay Output Polarity

In some cases you might want to make RUT955's relay default state ''high''. The problem is that when you reboot the router the router's relay goes back to its default state (''low'') for a short period of time. In this case if you want to constantly keep it in ''high' state you could connect your load like shown in the picture below:

[[File:Inverting relay output.png]]

For further information about relay control refer to this page: '''http://wiki.teltonika-networks.com/index.php?title=Input/Output'''

[[Category:RUT955 Hardware Application Examples]]