RUT955 RCM

From Teltonika Networks Wiki
Revision as of 14:18, 18 October 2022 by Lukas.Pipiras (talk | contribs) (→‎RUT955 8*****)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT955 > RUT955 Certification & Approvals > RUT955 RCM
Acma logo.png

The ACMA regulatory arrangements require a supplier to apply a compliance label to a product before the product is supplied to the Australian market.

Description

RCM 0.png

For all ACMA regulatory arrangements, the compliance label is the Regulatory Compliance Mark (RCM). The RCM replaces the A-Tick and C-Tick compliance marks used under previous regulatory arrangements.

The RCM is a visible indication of a product's compliance with all applicable ACMA regulatory arrangements, including all technical and record-keeping requirements.

RUT955

Standards applied


The conformity with the essential requirements has been demonstrated against the following standards:

Standard Description
AS/CA S042.1: 2018, AS/ACIF S042.3: 2005, AS/CA S042.4: 2018 Telecommunications Technical Standard (Requirements for Connection to an Air Interface of a Telecommunications Network – AS/CA S042) 2015
AS/NZS 60950.1: 2015 Telecommunications Technical Standard (Information technology equipment – Safety. Part 1: General Requirements AS/NZS 60950-1: 2011) 2011
AS/NZS 4268: 2017
EN 300 328 V2.1.1 (2016-11)
Radiocommunications (Short Range Devices) Standard 2014 (Amnt 1 : 2015)
Radiocommunications (Low Interference Potential Devices) Class Licence 2015
EN 55032: 2015
AS/NZS CISPR 32: 2015
Radiocommunications (Electromagnetic Compatibility) Standard 2008
EN 62311: 2008 Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard 2014

Attachments

Declaration of Conformity, page 1
Declaration of Conformity, page 2
Declaration of Conformity, page 3

You can find the PDF version of the Declaration of Conformity here

RUT955 2*****

Standards applied


The conformity with the essential requirements has been demonstrated against the following standards:


Requirement Complied Standard
Electrical Safety (EESS) AS/NZS 62368.1:2018
ACMA/RSM (EMC) AS/NZS CISPR 32:2015 + A1
ACMA/RSM (RF) Radiocommunications (Short Range Devices) Standard 2014
ACMA (EME) EME Standard (arpansa RPS S-1:2021)
ACMA (Telecom) Telecommunications (Mobile Equipment Air Interface) Technical Standard 2018
AS/NZS 62368.1:2018
Requirement Complied Regulation
MBIE (Telecom) Section 106, Telecommunications Act 2001

Attachments

Proof of Compliance, page 1
Proof of Compliance, page 2

You can find the PDF version of the Proof of Compliance here

Disclaimer:

Test reports that are referenced in declarations and certificates can be provided upon request. For the request to be approved, the recipient of the test reports should be a certification authority or certified test house. The recipients will be asked to sign a non-disclosure agreement (NDA).

External links