RUTX12 Firmware Downloads

---

This page contains firmware files for RUTX12 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUTX12 Firmware.

RUTX12

---

File	Type	Release date	Size	MD5	Changelog
RUTX_R_00.07.07.1_WEBUI.bin	Latest FW	2024.05.03	24.1 MB	8e428314520a8afc6206aad40a81cd63	Link
RUTX_R_00.07.06.10_WEBUI.bin	Mass production FW	2024.04.04	24.6 MB	6ade4748118720d9f8c72524498acf69	Link

RUTX_R_GPL_00.07.07.1.tar.gz

SDK

2024.05.03

80.59 MB

8dc4bcab07165557859ecf524f4b90b0

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.

FW checksums

---

Checksums for firmware files can be found here.

Changelog

RUTX_R_00.02.06.1 | 2021.02.10

• Fixes:
  • Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
  • Fixed SSH reachable over SIM IP in early boot
  • Fixed modem status after failed network scan
  • Fixed mbncfg function and PIN check logic
  • Fixed PPTP server interface naming
  • Fixed correct client PPTP interface name selection for route creation
  • Fixed adding helper to firewall's wan zone when enabling PPTP configuration
  • Added package size checking when manually installing a package
  • Fixed 'New Firmware Available' message display after firmware upgrade

RUTX_R_00.02.06 | 2020.12.31

• New features:
  • External Quectel modem support
  • Operator Whitelist/Blacklist
  • WPA3 WiFi encryption

• Improvements:
  • Updated base to OpenWrt 19.07.4
  • Added Phone Groups as possible SMS recipients to SMS Post/Get
  • Added PSK support for MQTT Broker/Publisher
  • Changed Output Scheduler structure
  • Removed limitation of one configuration per Input
  • Added multiple modem support for TR-069
  • Fixed parsing user uploaded custom OpenVPN configuration files containing carriage returns
  • Added iptables conntrack flush on WAN Failover if IPsec is enabled
  • Optimized package responsible for sending/receiving GRE Tunnel keepalive packets
  • Added extra error checking to Package Manager when downloading packages
  • Added data usage info for both SIM cards to RMS
  • Added logging to syslog when Ping/Wget Reboot "Action" is set to 'None'
  • Improved display of configuration tables when a lot of information is shown
  • Renamed MODBUS strings to uppercase
  • Added redirect to configuration page after a new configuration is created with the 'Add' button
  • Added option to create a Configuration Profile from current configuration
  • Added data validation to Profiles Scheduler fields
  • Replaced the Firewall 'Helpers' page with conntrack helper configuration for each firewall zone
  • Increased dynamic list maximum amount of values to 50
  • Added the possibility to save email accounts without entering email username and password
  • Unified device access password validations
  • Expanded DDNS validation for domain input to accept emails
  • Added SMS Utilities rule to reset mobile data usage for specified interface
  • Improved SMS Utilities VPN status rule to support custom configurations
  • Added SMS storage limit check after inserting a SIM card
  • Added primary and secondary modem related events to eventslog
  • Changed modem name from primary to internal if device has only one built-in modem
  • Improved SIM count check during init
  • Added the possibility to ignore DFS channels when automatic channel selection is performed (for 5 GHz WiFi)
  • Removed unsecure WPA-PSK and WPA-EAP encryption support
  • Improved Hotspot Landing page address validation to accept a trailing slash
  • Removed unnecessary warning message in the Hotspot page
  • Disable Wireless device & interface configurations when WiFi device is in 'pending' state
  • Removed unused 'Expiration time' option in the Hotspot page
  • Added the possibility to unpair all paired Bluetooth devices at once
  • Improved Bluetooth device to pair selection
  • Moved all USB related services to the 'Services -> USB Tools' page
  • Added 'General' page to 'Services -> USB Tools'; the page contains a list of all USB devices and the option to safely unmount the devices
  • Added 'passive-interface' and 'default-information' options to the OSPF configuration page
  • Added NHRP dynamic route status page
  • Split VLAN configuration page into two separate ones: 'Port Based' and 'Interface Based'

• Fixes:
  • Fixed IPsec Passthrough subnet/ip value parsing to make it dynamic for leftsubnet
  • Fixed occasions when error messages overlap buttons
  • Fixed I/O state saving after revert back to original state
  • Fixed IPsec connection after reboot
  • Fixed bridged interface configuration for L2TPv3
  • Removed trailing newlines in returned SNMP strings
  • Fixed Events Reporting waiting to send email before rebooting
  • Fixed MQTT MODBUS Gateway not working when topics have special characters
  • Swapped pin3 and pin4 values in MQTT Publisher
  • Added an 'IP4Table' option to advanced interface configuration
  • Fixed an issue where User Scripts were being deleted after device reboot
  • Fixed various WebUI validation bugs, typos, option hints & alignments
  • Fixed a bug that caused an internal sever error after logging in with a username that contained special characters
  • Fixed crashes that occur after configuration files are not correctly generated
  • Fixed a Firewall Port Forwarding bug which caused an internal sever error when no 'Protocol' was selected
  • Fixed changing WebUI mode bug while current page is accessed with POST method
  • Fixed password allowed lengths and tooltips
  • Fixed mountpoint display
  • Removed non-supported SMS Utilities rules
  • Fixed SMS sending to Phone Group on I/O event
  • Changed device name in 'Status' message to configured name instead of the default one
  • Added modem reinit after SIM card initialization failure
  • Fixed SMS Limit checking when messages exceed the set SMS limit
  • Moved 2-8 PDP contexts to 9-16 the 2-8 are necessary for SIM card MIB APNs
  • Changed mobile interface subnet to /32
  • Fixed modem SIM card checking
  • Fixed multi SMS handling on SMS Limit
  • Fixed Call Utilities multiple SMS sending per received call
  • Fixed SMS storage limit check on device reboot
  • Changed SNMP mSignal, mTemperature and numSatellities datatypes to correspond to devices' MIB files
  • Fixed WiFi SSID validation
  • Fixed keeping Hotspot Walled Garden address list after firmware upgrade
  • Fixed internal server error upon opening the 'Wireless' Status page while WiFi device band is set to 'Auto'
  • Fixed erroneous data usage display of external modem after it's been disconnected
  • Fixed Event Reporting on signal strength changes

RUTX_R_00.02.05.2 | 2020.11.19

• Fixes:
  • Randomized the global rate limiter to mitigate "SAD DNS" attack

RUTX_R_00.02.05.1 | 2020.09.30

• New features:
  • DLNA media server
  • iptables NETMAP extension
  • "Flush connections on" option for WAN Failover
  • New firmware notifications
  • Updated header logo from 'Teltonika' to 'Teltonika | Networks'
  • USSD command support
  • Time sync via network operator's station
  • SQM QoS
  • USB Tools
  • USB to Serial adapter support
  • Auto format USB storage devices to NTFS
  • Storage Memory Expansion
  • 802.11r support
  • WiFi Scanner

• Improvements
  • Improved WebUI page loading speed
  • Added Basic/Advanced mode selection in Setup Wizard
  • Added a dropdown with a search function for time zone selection
  • Added "copy to clipboard" button in Cloud Solutions next to MAC and Serial
  • Added option to send all Modbus records in one packet
  • Disabled IPV6 services on LAN by default
  • Added password hashing in Post/Get pages
  • Added a warning message about rebooting the device while certificate files are being generated
  • Added status option to uploaded custom OpenVPN configuration file
  • No longer showing "Enable OpenVPN config from file" option if "Enable external Services" is selected
  • Added some missing placeholder values
  • Added warning message about unsaved changes when leaving Auto Reboot, Periodic Reboot, Wireless pages
  • Added port selection to SSTP configuration
  • Changed Periodic Reboot service name to Reboot Scheduler
  • Added table row highlights on hover
  • Changed section name from 'Email users' to 'Email accounts' in the Recipients page
  • Added network interface automatic assignment to firewall zones when interface protocol is switched
  • Adjusted Azure validations
  • Adjusted Local/Remote subnet field validations
  • Adjusted Hotspot field validations
  • Unified VPN overview section option names and titles
  • Removed mandatory requirements for inter-zone forwarding source & destination options in Firewall zone configuration
  • Added placeholder values for drop down options in Routing pages
  • Increased maximum package upload size
  • Removed mobile interfaces from Hotspot configuration
  • Added "Passthrough subnets" option to IPsec configuration page
  • Added package size checking when installing packages via Package Manager
  • Optimized switching between Basic and Advanced WebUI modes
  • Added missing services to Events Reporting page when selected Event is "Config change"
  • Improved general web design, ordering and positioning
  • Added word wrap in the Unsaved Changes page
  • Centered 'Apply' button in the Profiles page
  • Hid network interfaces with DHCPv6 protocol in Overview page while in Basic WebUI mode
  • Changed tcpdump "Select storage" option value from 'Internal storage' to 'RAM memory' in the System → Administration → Troubleshoot page
  • Added more descriptive error messages when connection to FOTA server fails
  • Updated "Local address" hint in l2tpv3 page
  • Updated phone number placeholders to +37000000000
  • Updated SMS rule descriptions related to phone numbers and email accounts
  • Made SMS/Mobile data limit options always visible in Overview Setup page
  • Added indications for which antenna connector is connected to which modem
  • Adjusted Modem FW file validations
  • Added network selection option in Traffic logging page
  • Reworked Q-in-Q configuration page
  • Added loading spinner and a "No GPS signal" message to GPS Map page
  • Removed incorrect GPS analog input option from GPS HTTPS settings
  • Made ESSID value mandatory
  • Added wireless device status display in Wireless Overview page
  • Moved Hotspot2.0 to Services menu

• Fixes:
  • Fixed DDNS freeze issues
  • Fixed Firewall Traffic Rules Source and Destination address field validations
  • Started using more stable, builtin ar82xx switch driver
  • Symlinking tty devices in one place
  • Fixed period when sending packet curl timeouts in Modbus Data Sender
  • Fixed "active SIM" register value retrieval after regression in Modbus TCP Slave
  • Fixed Hotspot 'Trial access' function
  • Fixed OpenVPN TLS Cipher display and added a limit to number of ciphers
  • Fixed various WebUI validation bugs, typos & option hints
  • Fixed DHCP lease range validation and value saving in Interfaces page
  • Fixed error messages when creating interfaces with incorrect names
  • Fixed various section toggling bugs
  • Fixed username validation in SNMP page
  • Fixed certificate file importing bugs & common name display in Certificates Manager page
  • Fixed interface option related to IPv4 and IPv6 in Routing pages
  • Fixed OpenVPN multi-line command that adds client specific parameters
  • Fixed DHCP lease range validation in Basic mode
  • Fixed incorrect sorting in dynamic tables
  • Fixed routing table writing and deleting
  • Fixed incorrectly displayed type when no protocol is selected
  • Removed Wireguard interfaces from the Interfaces page
  • Fixed SNMP user access mode display in SNMPV3 Users Overview page
  • Fixed SNMP memory leak on chilli module
  • Fixed MD5 and SHA256 checksum calculations
  • Fixed DHCP-options field validation to allow separating parameters with commas
  • Fixed Package Manager side menu entry updates right after package upload
  • Fixed Wireguard port selection
  • Fixed VPN zone status display
  • Fixed lua errors when Start/End time option is empty
  • Fixed incorrectly displayed OpenVPN protocol
  • Fixed Lua errors in Profile Scheduler and Firewall Zones
  • Removed /log folder from Troubleshoot file directories
  • Fixed endless spinner when applying profiles
  • Fixed nil value in the Traffic Logging page
  • Fixed "Units" option dependency on "Enable DHCP" option in the Setup Wizard's LAN page
  • Fixed redirecting to login page after factory setting restore (reset)
  • Removed Unsaved Changes notification when downloading Troubleshoot/tcpdump files from the System → Administration → Troubleshoot page
  • Vulnerability fixes for Package Manager and Certificates Manager pages
  • Fixed Firewall zone placeholder (removed "-- Please select --" and left "Unspecified")
  • Fixed update from server option in the Firmware page
  • Added missing error messages when password is invalid in default password change page
  • Fixed "Lease time" option in the Setup Wizard's LAN page
  • Fixed error 500 when accessing Advanced pages while in Basic mode
  • Increased allowed character lengths for MQTT Broker and Data to Server
  • Fixed XSS vulnerabilities in package manager and package file upload pages
  • Fixed incorrect OpenVPN configuration saving
  • Fixed NHRP lua error
  • Removed "Wireguard" from Status → Services display if it is not installed
  • Fixed crashing issue when getting "SIM slot in use" satus value
  • Fixed sending status SMS to other number
  • Fixed "Change mobile settings" rule service setting
  • Fixed SMS Forwarding To HTTP "URL" option validation
  • Fixed Mobile Signal graph data display
  • Changed message type from 'error' to 'info' from Auto Reply page
  • Fixed manual operator selection validation
  • Fixed mobile interface authentication settings reset after selecting auto APN mode
  • Fixed libgsm password and serial authorization
  • Added workaround for mobile to switch LAN port throughput problem for ath79 target
  • Fixed Hotspot login page signup fields and notifications
  • Removed unnecessary default Hostname and URL values from GPS pages
  • Fixed AVL I/O incorrect option display in input rule configuration
  • Fixed "Enabled" option design in GPS Geofencing page
  • Fixed MAC address validation in Mobile Utilities page for Wake on LAN SMS rule
  • Fixed incorrect JSON parsing, eternal spinner when unpairing devices & RSSI display in the Bluetooth page
  • Fixed wireless interface turning on/off in the Wireless page
  • Added connected client number indication to the Overview page and Side Widget
  • Fixed platform tags in the Wireless Device edit page
  • Added checking if the device has 2.4/5 GHz wireless devices
  • Added missing "Hotspot 2.0" service in the Status → Services page
  • Fixed SMS storage bug
  • Fixed mobile data usage graph display
  • Fixed Post/Get modem select display

RUTX_R_00.02.04.3 | 2020.07.31

• New features:
  • Backup archive MD5 & SHA256 checksum calculation to help user identify altered backup archives
  • Package signature check to verify that a package comes from Teltonika

• Improvements:
  • Updated APN database

• Fixes:
  • Fixed CVE-2019-17367
  • Fixed hiding of configuration pages that users of a specific group don't have read access to
  • Fixed firmware upload script

RUTX_R_00.02.04.1 | 2020.07.02

• New features:
  • 'Mobile Passthrough' mode
  • Mobile signal real-time graph
  • USB Tools page with "USB to Serial" and "Printer Server" sections
  • Mobile data usage charts
  • Profile change action to "I/O Juggler"
  • Relay control to Call Utilities
  • 'Certificates' page for generating and managing TLS certificates
  • 'Drag & Drop' support for Overview page tables
  • 'Speed Test' feature
  • AVL I/O support
  • JSON formatting option for Data to Server
  • During this release a new package was released - WireGuard

• Improvements:
  • Added timeout and keep-connection options to Modbus TCP Slave
  • Removed incorrect SMS character counter from SMS Utilities page
  • Improved mobile interface creation
  • Improved L2TPv3 functionality with VLAN
  • Improved 'Profile Scheduler' with minute accuracy
  • Reordered VPN configuration options
  • Standardized section header styles
  • Unified spelling of dropdown values
  • Added information about 'Package Manager' packages before updating firmware
  • Updated services management to Status → Services page
  • Improved performance of firmware upgrades from server
  • Improved security features related to file uploading and HTTP headers
  • Changed RAM/flash memory units from MiB to MB
  • Updated warning message and lease deletion message for static leasing
  • Moved 'Country code' option to general tab
  • General web responsiveness improvements

• Fixes:
  • Fixed SMS send function in Hotspot 'SMS OTP' authentication mode
  • Fixed Enable/Disable function in Wireless page
  • Fixed validation in Wireless interface edit page
  • Fixed 'Wireless Scans' page table headers on smaller screens; changed 'Wireless Scans' page action button positioning
  • Fixed BLE device data collection immediately after pairing
  • Fixed missing data fields in Bluetooth device database
  • Fixed symlinking tty devices in one place
  • Fixed validations and option saving in OSPF page
  • Fixed various element positioning bugs on smaller screens
  • Fixed switching to advanced mode notification when accessing non existing pages
  • Fixed validations in Traffic Logging page
  • Fixed showing failover section only for interfaces with failover rules
  • Fixed static leases redirect after saving
  • Fixed empty dropdown values in 'I/O juggler' and 'Network Shares'
  • Fixed interface IP address validation in DDNS page
  • Fixed various spelling mistakes
  • Fixed broken address option in the 'Troubleshoot' page
  • Fixed dropdown select element double clicking issue
  • Fixed basic/advanced mode switching with Microsoft Edge browser
  • Fixed firmware upgrading bug when LAN interface with a changed name exists
  • Fixed redirecting to the 'Interfaces' page when mode is changed from basic to advanced and user is in the 'LAN' or 'WAN' pages
  • Fixed validation of custom header in 'Data To Server' page
  • Fixed "Type" option error in Failover page
  • Updated username and password validations
  • Fixed profile change action in 'I/O Juggler'
  • Fixed bidirectional GPIO change feature

RUTX_R_00.02.03.4 | 2020.06.15

• Fixes:
  • Fixed modem option set in basic mode for mobile interfaces
  • Fixed libgsm connection state function
  • LED fixes
  • Fixed Bluetooth config generation
  • Fixed config generation script

RUTX_R_00.02.03.1 | 2020.05.15

• New features:
  • Initial RUTX12 firmware release