Difference between revisions of "Serial Interface Control Commands TRM250"
From Teltonika Networks Wiki
m (Protected "Serial Interface Control Commands TRM250" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
|||
| Line 3: | Line 3: | ||
== Serial Interface Control Commands == | == Serial Interface Control Commands == | ||
| + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=33&zoom=100,68,232 AT&C Set DCD Function Mode]=== | ||
| + | ---- | ||
| + | The command controls the behavior of the UE’s DCD line. | ||
| − | [https://wiki.teltonika-networks.com | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=33&zoom=100,68,700 AT&D Set DTR Function Mode]=== |
| − | + | ---- | |
| − | + | The command determines how the UE responds if DTR line is changed from low to high level during data mode. | |
| − | |||
| − | |||
| − | |||
| − | The | ||
| − | |||
| − | |||
| + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=34&zoom=100,68,320 AT+IFC Set TE-TA Local Data Flow Control]=== | ||
| + | ---- | ||
The command determines the flow control behavior of the serial port. | The command determines the flow control behavior of the serial port. | ||
| − | [https://wiki.teltonika-networks.com | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=35&zoom=100,68,273 Set TE-TA Control Character Framing]=== |
| − | + | ---- | |
The command determines the serial interface character framing format and parity received by TA from TE. | The command determines the serial interface character framing format and parity received by TA from TE. | ||
| − | [https://wiki.teltonika-networks.com | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=36&zoom=100,68,273 AT+IPR Set TE-TA Fixed Local Rate]=== |
| − | + | ---- | |
| − | The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate>will not be restored with AT&F | + | The commandis used to query and set the baud rate of the UART. The default baud rate value ('''<rate>''') is 115200bps. The setting of '''<rate>''' will not be restored with '''AT&F'''. |
| − | |||
| − | |||
| − | If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=37&zoom=100,68,729 AT+QRIR* Restore RI Behaviorto Inactive]=== |
| + | ---- | ||
| + | If the RI (ring indicator) behavior is "always", it can be restored to inactive by the Execution Command. The RI behavior is controlled by '''AT+QCFG*'''. Please refer to '''AT+QCFG="urc/ri/ring"''', '''AT+QCFG="urc/ri/smsincoming"''', and '''AT+QCFG="urc/ri/other"''' for more details. | ||
[[Category:TRM250 AT Commands]] | [[Category:TRM250 AT Commands]] | ||
Latest revision as of 09:53, 13 March 2023
Main Page > TRM Modems > TRM250 > TRM250 Manual > TRM250 AT Commands > Serial Interface Control Commands TRM250Serial Interface Control Commands
AT&C Set DCD Function Mode
The command controls the behavior of the UE’s DCD line.
AT&D Set DTR Function Mode
The command determines how the UE responds if DTR line is changed from low to high level during data mode.
AT+IFC Set TE-TA Local Data Flow Control
The command determines the flow control behavior of the serial port.
Set TE-TA Control Character Framing
The command determines the serial interface character framing format and parity received by TA from TE.
AT+IPR Set TE-TA Fixed Local Rate
The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate> will not be restored with AT&F.
AT+QRIR* Restore RI Behaviorto Inactive
If the RI (ring indicator) behavior is "always", it can be restored to inactive by the Execution Command. The RI behavior is controlled by AT+QCFG*. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/smsincoming", and AT+QCFG="urc/ri/other" for more details.
