To change monitoring options for your device, go to the RMS web page, Left sidebar panel (<b>Management → Devices</b>)
# First, choose a device(s) for which the configuration will apply. If you select multiple devices,
11 KB (1,741 words) - 15:57, 11 January 2023
Cumulocity is the leading independent Device and Application Management Internet of Things (IoT) Platform since 2010. Ou
This example application streams some information from the router device. Once it is enabled you should be able to view in Cumulocity Cockpit the fo
11 KB (1,631 words) - 07:18, 3 September 2020
<!------------------------DEVICE----------------------->
.../Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
88 KB (12,583 words) - 09:30, 7 May 2024
...RTU is called Modbus gateway. This configuration example will be based on RUT955.
Here you can see that the Slave device is connected to the Serial port and Master is connected to LAN port and it
5 KB (799 words) - 14:58, 2 August 2023
RUT955 router are rated for protection against [[RUT955_DNV_GL|sweep spine vibrati
A customer uses RUT955 routers for remote network video recorder (NVR) access, GPS location and Wi
3 KB (444 words) - 08:04, 20 May 2019
<!------------------------DEVICE----------------------->
| name = RUT955
2 KB (237 words) - 14:42, 19 July 2021
'''''Note:''' Only one LAN device needs to perform the authentification on the Hotspot network. All other dev
...'' page on our Wiki. This page can be found by selecting the model of your device on the Wiki home page.
6 KB (1,013 words) - 16:22, 4 December 2023
...te a printed version of the Quick Start Guide in the packaging box of your device.
...fully follow the safety instructions and recommendations provided with the device.
22 KB (3,096 words) - 10:09, 28 February 2024
...works devices. For more detailed measurements, look to the [[#By device|By device]] section of this page.
<th width=70>Device</th>
8 KB (956 words) - 11:33, 3 December 2020
...m a serial device connected to the TRB142/5 to another serial device (e.g. RUT955/6) using OverIP via public IP or RMS VPN.
TRB142/5 and RUT955/6 have serial communication ports, that combined with '''Serial-Over-IP'''
3 KB (447 words) - 17:45, 3 August 2023
==RS232/RS485 console (only with RUT955)==
It is also possible to control a RUT955 router via RS232 or RS485 consoles. For this, however, you will need the ad
8 KB (1,374 words) - 12:45, 17 June 2020
...tep instructions on how to set up a printer connected to the USB port of a RUT955 router.
<li>A [[RUT955]] router running FW version RUT9XX_R_00.04.77 or newer ([[RUT955_Firmware_D
2 KB (397 words) - 15:31, 17 January 2020
...tep instructions on how to set up a printer connected to the USB port of a RUT955 router.
<li>A [[RUT955]] router running FW version RUT9XX_R_00.04.77 or newer ([[RUT955_Firmware_D
2 KB (397 words) - 15:32, 17 January 2020
This article contains instructions on how to lock your Teltonika device to a specific cell. All mobile carrier cells are assigned a unique ID, whic
'''Note:''' ''When the device is locked onto a single cell, it can still perform carrier aggregation (Cat
13 KB (2,180 words) - 13:48, 16 August 2023
<div>In new
device creation</div>
<div>1. Enter
Device ID</div>
9 KB (1,400 words) - 14:37, 7 May 2020
...cation Code identifies a particular model (and often revision) of wireless device for use on a GSM, UMTS or other IMEI-employing wireless network.
...the device (which is not always the same as the brand name stamped on the device).
3 KB (395 words) - 14:15, 15 May 2023
==RS232/RS485 console (only with RUT955)==
...uter for one end; the other end of the cable basically depends on your end device's capabilities (it can be USB, RS232, etc.)
8 KB (1,344 words) - 17:09, 22 March 2023
'''SNMP agent''' - Teltonika router. Device which sends Trap messages to the manager.
'''SNMP manager''' - device which listens for Trap messages from the agents.
10 KB (1,461 words) - 15:05, 2 August 2023
...r routers configured in this section as slave devices. A Modbus TCP master device can then request data from these Modbus TCP slaves. Here is the scheme to m
Firstly, let's configure our second router which will be acting as a slave device.
13 KB (1,877 words) - 12:40, 16 September 2019
...in. Please refer to the links below for information on how to recover your device.
<li>[[RUT230 Device Recovery Options|RUT230]]</li>
2 KB (200 words) - 13:43, 10 June 2020
