TAP200 Auto Reboot

From Teltonika Networks Wiki
Revision as of 16:20, 26 October 2023 by Vainius.l (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > TAP Access Points > TAP200 > TAP200 Manual > TAP200 WebUI > TAP200 System section > TAP200 Auto Reboot

The information in this page is updated in accordance with firmware version TAP200_R_00.07.07.1.

Summary

Various automatic device reboot scenarios can be configured in the Auto Reboot section. Automatic reboots can be used as a prophylactic or precautionary measure that ensures the device will self-correct some unexpected issues, especially related to connection downtime.

This chapter is an overview of the Auto Reboot section of TAP200 devices.


Ping/Wget Reboot

The Ping/Wget Reboot functions periodically send ICMP or Wget requests to a specified IP address or host and waits for a response. If no response is received, the device will attempt the same action a defined number of times at a defined frequency. If there is still no response, the device will execute the specified action (reboot, by default).

The Ping/Wget Reboot section contains one pre-configured rule by default:

Networking rutos manual auto reboot ping wget reboot settings.png

To enable the default rule, use the off/on slider next to it. You can add more rules with the 'Add' button or delete them using the 'Delete' button. The maximum limit of instances is 30. If you wish to customize a rule, click the button that looks like a pencil next to it.

Networking rutos manual auto reboot ping wget reboot settings configuration mobile 0 v2.png

Field Value Description
Enable off | on; default: off Turns the rule on or off.
Type Ping | Wget; default: Ping Method used for health checking.
  • Ping - sends ICMP requests to the specified host.
  • Wget - retrieves the contents of the specified web server.
Action if no echo is received Device reboot | None; default: Device reboot Action that will be executed if there is no response after the specified amount of retries. If None is selected, only a message to syslog will be logged.
Interval 5 mins | 15 mins | 30 mins | 1 hour | 2 hours; default: 5 mins The frequency at which ping/Wget requests are sent to the specified host.
Interval count integer [1..9999]; default: 2 Indicates how many additional times the device will try sending requests if the initial one fails.
Timeout (sec) integer [1..9999]; default: 5 Maximum response time. If no echo is received after the amount of time specified in this field has passed, the ping/wget request is considered to have failed.
Packet size integer [0..1000]; default: 56 ICMP packet size in bytes.
IP type IPv4 | IPv6; default: IPv4 IP address version of the host to ping.
Host to ping host | ip; default: 8.8.8.8 Hostname or IP address to which the Ping/Wget requests will be sent.

Reboot Scheduler

The Reboot Scheduler is a function that reboots the device at a specified time interval regardless of other circumstances. It can be used as a prophylactic measure, for example, to reboot the device once at the end of every day.

You can add more rules with the 'Add' button or delete them using the 'Delete' button. The maximum limit of instances is 30. If you wish to customize a rule, click the button that looks like a pencil next to it.

Networking rutos manual auto reboot reboot scheduler.png

The figure below is an example of the Periodic Reboot configuration page and the table below provides information on the fields contained in that page:

Networking rutos manual auto reboot reboot scheduler modify reboot instance.png

Field Value Description
Enable off | on; default: off Turns the rule on or off.
Action Device reboot ; default: Device reboot Action that will be executed at the specified time.
Interval type Week days | Month days; default: Week days Scheduler instance interval type.
Week days Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday; default: Monday Week day(s) when actions will be executed. This field becomes visible when Interval type is set to Week days.
Month day integer [1..31]; default: 1 Day of the month on which the reboot will occur. This field becomes visible when Interval type is set to Month days.
Month month(s) [january..december]; default: none The month(s) on which the reboot will occur. Leave empty to apply to all months. This field becomes visible when Interval type is set to Month days.
Day time time [00:00..23:59]; default: none Exact time of day the reboot will take place
Force last day off | on; default: off Forces intervals to accept last day of month as a valid option if selected day doesn't exist in the ongoing month. This field becomes visible when Interval type is set to Month days.