Difference between revisions of "TRB141 1-Wire Setup/Configuration"
From Teltonika Networks Wiki
| Line 4: | Line 4: | ||
Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. | Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. | ||
| + | |||
In this chapter, we will set up and configure the 1-Wire sensor with '''TRB141'''. | In this chapter, we will set up and configure the 1-Wire sensor with '''TRB141'''. | ||
Revision as of 11:27, 8 March 2023
The information on this page is updated in accordance with 00.07.04 firmware version.
Introduction
Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events.
In this chapter, we will set up and configure the 1-Wire sensor with TRB141.
Prerequisites
- TRB141
- 1-Wire sensor
- If 1-Wire doesn't have it's own Wires(Like Dallas DS1820 used in this example) you will need additional wires to connect sensor to TRB141
