TRB141 1-Wire Setup/Configuration

From Teltonika Networks Wiki
Revision as of 11:26, 8 March 2023 by Edvinas.Dryzas (talk | contribs) (Created page with "<p style="color:red">The information on this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.04'''] firmware version....")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

The information on this page is updated in accordance with 00.07.04 firmware version.

Introduction

Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. In this chapter, we will set up and configure the 1-Wire sensor with TRB141.

Prerequisites

  • TRB141
  • 1-Wire sensor
  • IF 1-Wire doesn't have it's own Wires(Like Dallas DS1820 used in this example) you will need additional wires to connect sensor to TRB141

Connecting 1-Wire Sensor with TRB141

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=TRB141_1-Wire_Setup/Configuration&oldid=104588"