TRB141 1-Wire Setup/Configuration

From Teltonika Networks Wiki

The information on this page is updated in accordance with 00.07.04 firmware version.

Introduction

Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. In this chapter, we will set up and configure the 1-Wire sensor with TRB141.

Prerequisites

  • TRB141
  • 1-Wire sensor
  • If 1-Wire doesn't have it's own Wires(Like Dallas DS1820 used in this example) you will need additional wires to connect sensor to TRB141

Connecting 1-Wire Sensor with TRB141