Line 1: |
Line 1: |
− | __TOC__
| + | {{Template: Networking_rutos_manual_rs232 |
− | ==Summary==
| + | <!------------------------DEVICE-----------------------> |
− | | + | | name = TRB142 |
− | {{Template: webui_services_rs232_summary}} | + | | series = TRB1 |
− | | + | <!----------------------SEPARATORS---------------------> |
− | ==RS232 connector pinout== | + | | baud_rate = 115200 <!-- Default baud rate --> |
− | | + | | baud_rates = 300 {{!}} 600 {{!}} 1200 {{!}} 2400 {{!}} 4800 {{!}} 9600 {{!}} 19200 {{!}} 38400 {{!}} 57600 {{!}} 115200 <!-- All baud rate values--> |
− | The RS232 connector type on this device is a '''DCE female'''. DCE stands for Data Communication Equipment.
| + | | data_bit = 8 <!-- Default data bits --> |
− | | + | | data_bits = 5 {{!}} 6 {{!}} 7 {{!}} 8 <!-- All data bits values --> |
− | {{Template:trb142_rs232_connector_pinout}}
| + | | modem = 1 |
− | | + | }} |
− | ==Cables==
| |
− | | |
− | There are two types of RS232 serial devices: DTE and DCE. DTE typically refers to the serial port on a PC or terminal, while DCE refers to communication devices. Connectors mounted on DTE are likely to be male, and those mounted on DCE are likely to be female.
| |
− | | |
− | RUT955 is DCE and has a female connector.
| |
− | ---- | |
− | To connect a standard DTE device to RUT955, use a straight-through Female/Male RS232 cable:
| |
− | | |
− | [[Image:Services rs232 connector female male.PNG]]
| |
− | | |
− | See straight cable pinout below:
| |
− | | |
− | [[File:Straight cable pinout.png|400px]]
| |
− | ---- | |
− | | |
− | To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:
| |
− | | |
− | [[File:Male male rs232 cable.jpg]]
| |
− | | |
− | See straight crossed cable pinout below:
| |
− | | |
− | [[File:Straight crossed rs232 cable pinout.png|400px]]
| |
− | ---- | |
− | | |
− | Maximum cable length is 15 meters or the cable length equal to a capacitance of 2500 pF (for a 19200 baud rate). Using lower capacitance cables can increase the distance. Reducing communication speed can also increase maximum cable length.
| |
− | | |
− | | |
− | ==RS232 Configuration== | |
− | | |
− | {{Template: webui_services_rs232_rs232_configuration_general}} | |
− | | |
− | [[File:Trb142 webui services rs232 rs232 configuration general v1.png]]
| |
− | | |
− | {{Template: webui_services_rs232_rs232_configuration_general_table}} | |
− | | |
− | ==Serial types==
| |
− | | |
− | {{Template: webui_services_rs232_rs232_configuration_serial_types_summary}} | |
− | | |
− | ===Console===
| |
− | ----
| |
− | {{Template: webui_services_rs232_rs232_configuration_console}} | |
− | | |
− | ===Over IP===
| |
− | ----
| |
− | {{Template: webui_services_rs232_rs232_configuration_over_ip}} | |
− | | |
− | [[File:Trb142 webui services rs232 rs232 configuration serial type over ip v4.png]]
| |
− | | |
− | {{Template: webui_services_rs232_rs232_configuration_over_ip_table}} | |
− | | |
− | ===Modem===
| |
− | ----
| |
− | {{Template: webui_services_rs232_rs232_configuration_modem}} | |
− | | |
− | [[File:Trb142 webui services rs232 rs232 configuration serial type modem v1.png]]
| |
− | | |
− | {{Template: webui_services_rs232_rs232_configuration_modem_table}} | |
− | | |
− | ===Modbus gateway===
| |
− | ---- | |
− | {{Template: webui_services_rs232_rs232_configuration_modbus_gateway}} | |
− | | |
− | [[File:Trb142 webui services rs232 rs232 configuration serial type modbus gateway v1.png]]
| |
− | | |
− | {{Template: webui_services_rs232_rs232_configuration_modbus_gateway_table}} | |
− | | |
− | ===NTRIP client===
| |
− | ---- | |
− | {{Template: webui_services_rs232_rs232_configuration_ntrip_client}}
| |
− | | |
− | [[File:Trb142 webui services rs232 rs232 configuration serial type ntrip client v1.png]]
| |
− | | |
− | {{Template: webui_services_rs232_rs232_configuration_ntrip_client_table}}
| |