Line 34: |
Line 34: |
| # Press '''Add''' button. | | # Press '''Add''' button. |
| # Create a '''Name''' (anything you want). | | # Create a '''Name''' (anything you want). |
− | # Write '''Addresses''', it is an address range which will be used for PPPoE clients (in this tutorial I used | + | # Write '''Addresses''', it is an address range which will be used for PPPoE clients (in this tutorial I used 192.168.5.10-192.168.5.20). |
− | 192.168.5.10-192.168.5.20). | |
| # Press '''Apply'''. | | # Press '''Apply'''. |
| # Press '''Ok'''. | | # Press '''Ok'''. |
| | | |
| [[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]] | | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]] |
| + | |
| + | # Open '''PPP''' settings. |
| + | # Select '''PPPoE Servers'''. |
| + | # Press '''Add''' button. |
| + | # Write '''Service Name''' (anything you want). |
| + | # Select '''Interface''' (ether5). |
| + | # Press '''Apply''' button. |
| + | # Press '''Ok''' button. |
| | | |
| [[File:Networking_rutx_configuration_example_mikrotik_pppoe_4_v1.png|border|class=tlt-border]] | | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_4_v1.png|border|class=tlt-border]] |
| + | |
| + | # If you have closed the window, open '''PPP''' settings again. |
| + | # Select '''Secrets'''. |
| + | # Press '''Add''' button. |
| + | # Create a '''Name''' (it will be later used to connect PPPoE server). |
| + | # Create a '''Password''' (it will be later used to connect PPPoE server). |
| + | # Press '''Apply'''. |
| + | # Press '''Ok'''. |
| | | |
| [[File:Networking_rutx_configuration_example_mikrotik_pppoe_5_v1.png|border|class=tlt-border]] | | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_5_v1.png|border|class=tlt-border]] |
| + | |
| + | # If you have closed the window, open '''PPP''' settings again. |
| + | # Select '''Profiles'''. |
| + | # Press '''Add'''. |
| + | # Create a '''Name'''. |
| + | # Set '''Local Address''' (select your LAN IP-Pool). |
| + | # Set '''Remote Address''' (select PPPoE IP-Pool which you recently created). |
| + | # Press '''Apply'''. |
| + | # Press '''Ok'''. |
| | | |
| [[File:Networking_rutx_configuration_example_mikrotik_pppoe_6_v1.png|border|class=tlt-border]] | | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_6_v1.png|border|class=tlt-border]] |