0
edits
Changes
Template:Netoworking rutx configuration example mikrotik pppoe (view source)
Revision as of 18:45, 5 March 2020
, 18:45, 5 March 2020→Mikrotik (server) configuration
==Mikrotik (server) configuration==
==Mikrotik (server) configuration==
Connect to MikroTik by using '''WinBox''' application and follow all the further steps to create PPPoE server
on LAN port 5.
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_1_v1.png|border|class=tlt-border]]
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_1_v1.png|border|class=tlt-border]]
# Open '''Bridge''' settings.
# Navigate to '''Ports''' section.
# Select '''ether5'''.
# Press '''Delete'''.
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_2_v1.png|border|class=tlt-border]]
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_2_v1.png|border|class=tlt-border]]
# Open '''IP''' settings.
# Select '''Pool''' settings.
# Press '''Add''' button.
# Create a '''Name''' (anything you want).
# Write '''Addresses''', it is an address range which will be used for PPPoE clients (in this tutorial I used
192.168.5.10-192.168.5.20).
# Press '''Apply'''.
# Press '''Ok'''.
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]]
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]]
