Changes

Connect to MikroTik by using '''WinBox''' application and press '''New Terminal'''.

Connect to MikroTik by using '''WinBox''' application and press '''New Terminal'''.

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_1_v1.jpg|border|class=tlt-border|center]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_1_v1.jpg|border|class=tlt-border]]

The first step is to create a PPP Profile on the MikroTik. Use a 192.168.102.1 for the local address (the VPN Gateway), assuming this is not already in use. You will also need to add a DNS Server. Use this command:

The first step is to create a PPP Profile on the MikroTik. Use a 192.168.102.1 for the local address (the VPN Gateway), assuming this is not already in use. You will also need to add a DNS Server. Use this command:

Now go to '''IP > Firewall''' and change positions of the 2 Firewall rules you just created (drag it to the top like in the example) in order to move them, press '''#''' sign.

Now go to '''IP > Firewall''' and change positions of the 2 Firewall rules you just created (drag it to the top like in the example) in order to move them, press '''#''' sign.

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_2_v1.jpg|border|class=tlt-border|center]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_2_v1.jpg|border|class=tlt-border]]

==RUT configuration==

==RUT configuration==

Access RUTxxx WebUI and go to '''Services > VPN > L2TP'''. There create a new configuration by selecting role '''Client'', writing '''New configuration name''' (anything you want) and pressing '''Add New''' button. It should appear after a few seconds. Then press '''Edit'''.

Access RUTxxx WebUI and go to '''Services > VPN > L2TP'''. There create a new configuration by selecting role '''Client'', writing '''New configuration name''' (anything you want) and pressing '''Add New''' button. It should appear after a few seconds. Then press '''Edit'''.

[[File:|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_3_v1.jpg|border|class=tlt-border]]

Then apply the following configuration.

Then apply the following configuration.

[[File:|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_4_v1.jpg|border|class=tlt-border]]

# '''Enable''' instance.

# '''Enable''' instance.