Changes

Now go to '''Services > VPN > IPsec'''.

Now go to '''Services > VPN > IPsec'''.

[[File:|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_5_v1.jpg|border|class=tlt-border]]

# Write '''Pre-shared key''' (write the password which you created with this command /ip ipsec identity add generate-policy=port-override auth-method=pre-shared-key secret="password" peer=l2tpserver ).

# Write '''Pre-shared key''' (write the password which you created with this command /ip ipsec identity add generate-policy=port-override auth-method=pre-shared-key secret="password" peer=l2tpserver ).

# When the interface appears like in the example, press '''Edit'''.

# When the interface appears like in the example, press '''Edit'''.

[[File:|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_6_v1.jpg|border|class=tlt-border]]

# '''Enable''' instance.

# '''Enable''' instance.

Go to '''Status > Routes''' and in the '''Active IP Routes''' table you should see this new route:

Go to '''Status > Routes''' and in the '''Active IP Routes''' table you should see this new route:

[[File:|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_7_v1.jpg|border|class=tlt-border]]

 

 

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_8_v1.jpg|border|class=tlt-border]]

Also, you can check whether '''IPsec''' is working by writing this command to CLI:

Also, you can check whether '''IPsec''' is working by writing this command to CLI:

  Security Associations (1 up, 0 connecting)

  Security Associations (1 up, 0 connecting)

[[File:|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_9_v1.jpg|border|class=tlt-border]]