Changes

Try to change some data in the Modbus Slave simulator.

Try to change some data in the Modbus Slave simulator.

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_12_v1.png|border|class=tlt-border]]

Received data should change.

Received data should change.

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_13_v1.png|border|class=tlt-border]]

==Slave alarms==

==Slave alarms==

Go back to '''Services > Modbus > Modbus Serial Master''' and press edit the same Slave configuration or create a new one. There will be section called '''Slave alarms'''. Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''.

Go back to '''Services > Modbus > Modbus Serial Master''' and press edit the same Slave configuration or create a new one. There will be section called '''Slave alarms'''. Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''.

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_14_v1.png|border|class=tlt-border]]

Then apply the following configuration:

Then apply the following configuration:

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_15_v1.png|border|class=tlt-border]]

# '''Enable''' instance.

# '''Enable''' instance.

Now go back to '''Modbus slave simulator''' and edit this window:

Now go back to '''Modbus slave simulator''' and edit this window:

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_16_v1.png|border|class=tlt-border]]

Change the value to anything below 5, you should not receive messages. Then change the value to anything above 5, you should start receiving messages.

Change the value to anything below 5, you should not receive messages. Then change the value to anything above 5, you should start receiving messages.