Changes

In the topology below you can find information on how the device and server are connected.

In the topology below you can find information on how the device and server are connected.

[[File:Networking_rut955_configuration_modbus_serial_8_v1.png|border|class=tlt-border]]

[[File:|border|class=tlt-border]]

There are many ways how you can create a server to which Modbus will send data to. In this example we are going to be using Windows 10 computer and Hercules app, which you can download  [https://www.hw-group.com/product-version/hercules here], to create a test server. Download, install the app and apply the configuration below:

There are many ways how you can create a server to which Modbus will send data to. In this example we are going to be using Windows 10 computer and Hercules app, which you can download  [https://www.hw-group.com/product-version/hercules here], to create a test server. Download, install the app and apply the configuration below:

[[File:Networking_rut955_configuration_modbus_serial_9_v1.png|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_8_v1.png|border|class=tlt-border]]

# Select '''TCP Server''' tab.

# Select '''TCP Server''' tab.

In order to setup your router to send Modbus data to server you will need to navigate to '''Services > Modbus > Modbus Data to Server'''.

In order to setup your router to send Modbus data to server you will need to navigate to '''Services > Modbus > Modbus Data to Server'''.

[[File:Networking_rut955_configuration_modbus_serial_10_v1.png|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_9_v1.png|border|class=tlt-border]]

# Select '''Protocol''' (In this example HTTP(S) will be used).

# Select '''Protocol''' (In this example HTTP(S) will be used).

Then you will be redirected to '''Advanced sender settings'''.

Then you will be redirected to '''Advanced sender settings'''.

[[File:Networking_rut955_configuration_modbus_serial_11_v1.png|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_10_v1.png|border|class=tlt-border]]

# Enter '''Name''' (It can be anything you want).

# Enter '''Name''' (It can be anything you want).

Open Hercules again, press '''Listen''' and you should start receiving Modbus Data messages.

Open Hercules again, press '''Listen''' and you should start receiving Modbus Data messages.

[[File:|border|class=tlt-border]]

[[File:Networking_rut955_configuration_modbus_serial_11_v1.png|border|class=tlt-border]]

Try to change some data in the Modbus Slave simulator.

Try to change some data in the Modbus Slave simulator.