Changes

2,898 bytes added , 14:39, 19 August 2021

no edit summary

Line 1: Line 1: +

{{Template: Networking_rutxxx_manual_fw_disclosure

+

| fw_version = {{#switch: {{{series}}}

+

| RUT2XX = {{{series}}}_R_00.01.14.3

+

| RUT9XX = {{{series}}}_R_00.06.08.2}}

+

| series = {{{series}}}

+

}}

==Summary==

−

~~'''~~Simple Network Management Protocol (SNMP)~~'''~~ is a popular protocol for network management. It is used for collecting information from, and configuring, network devices~~. This section is an overview of the '''SNMP''' function in RUT routers~~.

+

Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is used for collecting information from, and configuring, network devices.

−

~~{{#if:{{{device_name|}}}|{{Template: Networking_rut9xx_rut2xx_rutxxx_manual_package_disclosure~~

+

This manual page provides an overview of the SNMP function in {{{name}}} devices.

−

~~| device_name = {{{device_name}}}~~

−

~~| package_name =~~ SNMP

−

~~| series =~~ {{{~~series}}}~~

−

}}}}

−

{{Template: ~~Networking_rutxxx_manual_fw_disclosure~~

+

{{Template:Networking_rutos_manual_package_disclosure

−

| ~~fw_version~~ = {{{~~fw_version~~}}}

+

| name = {{{name}}}

+

| series = {{{series}}}

+

| package = SNMP

}}

Line 36: Line 40:

<tr>

−

<th>~~field name~~</th>

+

<th>Field</th>

−

<th>~~value~~</th>

+

<th>Value</th>

−

<th>~~description~~</th>

+

<th>Description</th>

</tr>

<tr>

−

+

<td>- (interactive button)</td>

−

<td>Downloads ~~Teltonika's~~ MIB file</td>

+

<td>Downloads the MIB file for this device.</td>

</tr>

<tr>

<td>Enable SNMP service</td>

−

<td>yes ~~{{!}}~~ no; ~~Default~~: ~~'''~~no~~'''~~</td>

+

<td>yes | no; default: no</td>

−

<td>~~Toggles~~ SNMP ON or ~~OFF~~</td>

+

<td>Turns SNMP on or off.</td>

</tr>

<tr>

<td>Enable remote access</td>

−

<td>yes ~~{{!}}~~ no; ~~Default~~: ~~'''~~no~~'''~~</td>

+

<td>yes | no; default: no</td>

−

<td>Opens a port in ~~firewall~~ so that the SNMP service may be reached remotely from WAN</td>

+

<td>Opens a port (set in the field below) in the Firewall settings so that the SNMP service may be reached remotely from WAN.</td>

</tr>

<tr>

−

<td>integer [0..65535]; ~~Default~~: ~~'''~~161~~'''~~</td>

+

<td>integer [0..65535]; default: 161</td>

−

<td>SNMP service port</td>

+

<td>SNMP service port.</td>

</tr>

<tr>

<td>Community</td>

−

<td>Public ~~{{!}}~~ Private ~~{{!}}~~ Custom; ~~Default~~: ~~'''~~Public~~'''~~</td>

+

<td>Public | Private | Custom; default: Public</td>

−

<td>SNMP Community is an ID that allows access to a router's SNMP data</td>

+

<td>SNMP Community is an ID that allows access to a router's SNMP data.</td>

</tr>

<tr>

<td>Location</td>

−

<td>string; ~~Default~~: ~~'''~~Location~~'''~~</td>

+

<td>string; default: Location</td>

−

<td>~~Trap named sysLocation~~</td>

+

<td>SysLocation object. Arbitrary SNMP variable that represents a custom location.</td>

</tr>

<tr>

<td>Contact</td>

−

<td>string; ~~Default~~: ~~'''~~[email protected]~~'''~~</td>

+

<td>string; default: [email protected]</td>

−

<td>~~Trap named sysContact~~</td>

+

<td>SysContact object. Arbitrary SNMP variable that represents a contact Name.</td>

</tr>

<tr>

−

<td>string; ~~Default~~: ~~'''~~Name~~'''~~</td>

+

<td>string; default: Name</td>

−

<td>~~Trap named sysName~~</td>

+

<td>SysName object. Arbitrary SNMP variable that represents the system's Name.</td>

</tr>

<tr>

<td>SNMP version</td>

−

<td>v1/v2 ~~{{!}}~~ v1/v2/v3 ~~{{!}}~~ v3; ~~Default~~: ~~'''~~v1/v2~~'''~~</td>

+

<td>v1/v2 | v1/v2/v3 | v3; default: v1/v2</td>

−

<td>Specifies which SNMP version is to be used</td>

+

<td>Specifies which SNMP version is to be used.</td>

</tr>

</table>

Line 93: Line 97:

<tr>

−

<th>~~field name~~</th>

+

<th>Field</th>

−

<th>~~value~~</th>

+

<th>Value</th>

−

<th>~~description~~</th>

+

<th>Description</th>

</tr>

<tr>

−

<td>yes ~~{{!}}~~ no; ~~Default~~: ~~'''~~no~~'''~~</td>

+

<td>yes | no; default: no</td>

−

<td>~~Toggles~~ SNMP trap ON or ~~OFF~~</td>

+

<td>Turns SNMP trap on or off.</td>

</tr>

<tr>

−

<td>host ~~{{!}}~~ ip; ~~Default~~: ~~" "~~</td>

+

<td>host | ip; default: none</td>

−

<td>Host to transfer SNMP traffic to</td>

+

<td>Host to transfer SNMP traffic to.</td>

</tr>

<tr>

−

<td>integer [0..65535]; ~~Default~~: ~~'''~~162~~'''~~</td>

+

<td>integer [0..65535]; default: 162</td>

−

+

<td>Port number of the trap's host.</td>

</tr>

<tr>

<td>Community</td>

−

<td>Public ~~{{!}}~~ Private; ~~Default~~: ~~'''~~Public~~'''~~</td>

+

<td>Public | Private; default: Public</td>

−

<td>SNMP Community is an ID that allows access to a router's SNMP data</td>

+

<td>SNMP Community is an ID that allows access to a router's SNMP data.</td>

</tr>

+

</table>

+

===List of traps===

+

----

+

+

<tr>

+

+

<th style="width: 560px">DESCRIPTION</th>

+

</tr>

+

<tr>

+

<td>Signal strength trap</td>

+

<td>A message will be sent when the mobile signal strength drops below specified value.</td>

+

</tr>

+

<tr>

+

<td>Connection type trap</td>

+

<td>A message will be sent when connection type changes, e.g. GSM changes to WCDMA.</td>

+

</tr>

+

<tr>

+

<td>Digital input trap</td>

+

<td>A message will be sent when digital input state will change to a specified one.</td>

+

</tr>

+

<tr>

+

<td>Digital output trap</td>

+

<td>A message will be sent when digital output state will change to a specified one.</td>

+

</tr>

+

{{#ifeq:{{{name}}}|RUT955|

+

<tr>

+

<td>Digital isolated input trap</td>

+

<td>A message will be sent when digital isolated input state will change to a specified one.</td>

+

</tr>

+

<tr>

+

<td>Analog input trap</td>

+

<td>A message will be sent when input voltage changes, e.g. voltage is Higher than 6V.</td>

+

</tr>

+

<tr>

+

<td>Digital relay output trap</td>

+

<td>A message will be sent when digital relay output state will change to a specified one.</td>

+

</tr>

+

|}}

</table>

Line 126: Line 170:

<th style="width: 579px">DESCRIPTION</th>

+

</tr>

+

<tr>

+

<th>Device</th>

+

+

</tr>

<tr>

Line 176: Line 225:

<td>Router's Hardware Revision number</td>

+

</tr>

+

<tr>

+

<th>Mobile</th>

+

+

</tr>

<tr>

Line 223: Line 277:

</tr>

<tr>

−

<td>ReceivedToday.0</td>

+

<td>ReceivedToday.0*</td>

−

<td>~~Tee~~ current day's RX packet count</td>

+

<td>The current day's RX packet count</td>

</tr>

<tr>

−

<td>SentToday.0</td>

+

<td>SentToday.0*</td>

<td>The current day's TX packet count</td>

</tr>

<tr>

−

<td>ReceivedYesterday.0</td>

+

<td>ReceivedYesterday.0*</td>

<td>Yesterday's RX packet count</td>

</tr>

<tr>

−

<td>SentYesterday.0</td>

+

<td>SentYesterday.0*</td>

<td>Yesterday's TX packet count</td>

Line 268: Line 322:

</tr>

<tr>

−

+

<td>The amount of data sent through the mobile interface</td>

</tr>

<tr>

−

<td>Received.0</td>

+

<td>Received.0*</td>

<td>The amount of data received through the mobile interface</td>

Line 296: Line 350:

<td>RSRQ value in dB</td>

+

</tr>

+

<tr>

+

<td>iccid.0</td>

+

+

<td>ICCID value for current SIM</td>

+

</tr>

+

<tr>

+

<th>Hotspot**</th>

+

+

</tr>

<tr>

<td>hotSpotId.0</td>

−

+

<td>Hotspot ID</td>

</tr>

<tr>

<td>hotSpotSsid.0</td>

−

+

<td>Hotspot SSID</td>

</tr>

<tr>

<td>hotSpotEnableState.0</td>

−

+

<td>Hotspot status (enabled or disabled)</td>

</tr>

<tr>

<td>hotSpotIP.0</td>

−

+

<td>Hotspot interface IP address</td>

</tr>

<tr>

<td>hotSpotDownloadBandWidth.0</td>

−

+

<td>Hotspot download bandwidth</td>

</tr>

<tr>

<td>hotSpotUploadBandWidth.0</td>

−

+

<td>Hotspot upload bandwidth</td>

</tr>

<tr>

<td>hotSpotUsers.0</td>

−

+

<td>Hotspot users list</td>

</tr>

<tr>

<td>hotSpotUsersPass.0</td>

−

+

<td>Hotspot users password list </td>

</tr>

<tr>

<td>hotSpotUsersActive.0</td>

−

+

<td>List of active Hotspot users</td>

</tr>

<tr>

<td>hotSpotUsersMac.0</td>

−

+

<td>Hotspot users MAC address list</td>

</tr>

<tr>

<td>hotSpotUsersIp.0</td>

−

+

<td>Hotspot users IP address list</td>

</tr>

<tr>

<td>hotSpotUsersStartTime.0</td>

−

+

<td>Hotspot users log in time list</td>

</tr>

<tr>

<td>hotSpotUsersUseTime.0</td>

−

+

<td>Hotspot users log in up-time list</td>

</tr>

<tr>

−

<td>hotSpotUsersDownload</td>

+

<td>hotSpotUsersDownload.0</td>

−

+

<td>Hotspot users downloaded data count</td>

</tr>

<tr>

<td>hotSpotUsersUpload.0</td>

−

+

<td>Hotspot users uploaded data count</td>

</tr>

<tr>

<td>hotSpotEndTime.0</td>

−

+

<td>Hotspot</td>

+

</tr>

+

<tr>

+

<th>Input/Output</th>

+

+

</tr>

<tr>

Line 406: Line 475:

<td>Analog input value</td>

+

</tr>

+

{{#ifeq:{{{name}}}|RUT955|

+

<tr>

+

<td>digital4pinInput.0</td>

+

+

<td>Digital input state from 4PIN</td>

+

</tr>

+

<tr>

+

<td>digital4pinOutput.0</td>

+

+

<td>Digital output state from 4PIN</td>

+

</tr>

+

<tr>

+

+

+

</tr>

<tr>

Line 432: Line 517:

<td>Number of GPS satelites</td>

</tr>

+

|}}

</table>

−

[[Category:{{{~~device_name~~}}} Services section]]

+

* Mobile data usage values can only be obtained with SNMP v2 or v3.

+

** Values from second, third or fourth hotspot instance can be taken by changing X value .1.3.6.1.4.1.48690.3.X.1.0, possible values are 1 - 4.

+

[[Category:{{{name}}} Services section]]

Gytispieze

Bureaucrats, Interface administrators, Administrators

9,567

edits

Changes

Template:Networking rut manual snmp (view source)

Revision as of 14:39, 19 August 2021