9,312
edits
Changes
Template:Networking rutos manual snmp (view source)
Revision as of 14:16, 1 September 2022
, 14:16, 1 September 2022→Summary
<!-- Template uses {{{name}}}, {{{series}}}, and if device doesnt have mobile then {{{mobile}}} = 0-->
<!-- Template uses {{{name}}}, {{{series}}}, and if device doesn't have mobile then {{{mobile}}} = 0-->
{{Template:Networking_rutos_manual_fw_disclosure
{{Template: Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| series = {{{series}}}
| name = {{{name}}}
}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} SNMP (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} SNMP (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
==Summary==
==Summary==
<b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.
<b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.
{{#switch: {{{series}}} | RUTX|TRB1|TRB5=|#default=
<u><b>
Note:</b> SNMP is additional software that can be installed from the <b>Services → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
}}
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
</tr>
</tr>
<tr>
<tr>
<td>Protocol</td>
<td>IP family</td>
<td>UDP | TCP; default: '''UDP'''</td>
<td>IPv4 | IPv6 | IPv4v6; default: '''IPv4'''</td>
<td>SNMP service's protocol.</td>
<td>IP family used by SNMP.</td>
</tr>
</tr>
<tr>
<tr>
<td>ip; default: <b>none</b></td>
<td>ip; default: <b>none</b></td>
<td>Netmask for IP of the community.</td>
<td>Netmask for IP of the community.</td>
</tr>
<tr>
<td>Access Mode</td>
<td>Read-Only | Read-Write; default: <b>Read-Only</b></td>
<td>Access mode for current community.</td>
</tr>
</table>
SNMPv6 community configuration page:
[[File:Networking_rutos_manual_snmp_communities_snmpv6_community_configuration.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Community name</td>
<td>string; default: <b>none</b></td>
<td>Name of the community.</td>
</tr>
<tr>
<td>Source</td>
<td>ip6 | domain name; default: <b>default</b></td>
<td>Source of the community.</td>
</tr>
</tr>
<tr>
<tr>
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]]
You should be redirected to the rule's configuration page which should look something like this:
You should be redirected to the rule's configuration page which should look something like this:
<tr>
<tr>
<th>field name</th>
<th>field name</th>
<th>value</th>
<th>value1</th>
<th>description</th>
<th>description</th>
</tr>
</tr>
<tr>
<tr>
<td>Input/Output name</td>
<td>Input/Output name</td>
<td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td>
<td>Output(4) {{!}} Input(3); default: <b>Output(4)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>}}
|RUT36X =
<tr>
<td>Input/Output type</td>
<td>Input/Output; default: <b>Input/Output</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td>Input/Output name</td>
<td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td>State change</td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
|RUT9 =
{{#ifeq:{{{name}}}|RUT955|
<tr>
<td>Input/Output type</td>
<td><span style="color:blue">Input/Output</span> {{!}} <span style="color:forestgreen"><b>Relay</b></span> {{!}} <span style="color:darkred"><b>4–20 mA Current Loop</b></span> {{!}} <span style="color:chocolate">ADC</span>; default: <b>Input/Output</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:blue">Input/Output:</span> Input/Output name</td>
<td>Input (3) {{!}} Input (1) {{!}} Output(4) {{!}} Isolated Output (3,4,8) {{!}} Isolate Input (2,7); default: <b>Input (3)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:blue">Input/Output:</span> State change</td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:forestgreen">Relay:</span> Input/Output name</td>
<td>Relay(5,10); default: <b>Relay(5,10)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:forestgreen">Relay:</span> State change</td>
<td>Open {{!}} Closed {{!}} Both; default: <b>Open</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:darkred">4–20 mA Current Loop:</span> Input/Output name</td>
<td>Analog Current Loop (6,9); default: <b>Analog Current Loop (6,9)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:darkred">4–20 mA Current Loop:</span> Voltage</td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>At which voltage value will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:chocolate">ADC:</span> Input/Output name</td>
<td>Analog Input (6,9); default: <b>Analog Input (6,9)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:chocolate">ADC:</span> Voltage</td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>At which voltage value will this rule be triggered.</td>
</tr>
</tr>
|RUT3 =
|
<tr>
<tr>
<td>Input/Output type</td>
<td>Input/Output type</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemImei.0</td>
<th>Device</th>
<th></th>
<th></th>
</tr>
<tr>
<td>serial</td>
<td>.1.3.6.1.4.1.48690.1.1.0</td>
<td>.1.3.6.1.4.1.48690.1.1.0</td>
<td>Modem IMEI</td>
<td>Device serial number</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemModel.0</td>
<td>routerName.0</td>
<td>.1.3.6.1.4.1.48690.1.2.0</td>
<td>.1.3.6.1.4.1.48690.1.2.0</td>
<td>Modem model</td>
<td>Device name</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemManufacturer.0</td>
<td>productCode</td>
<td>.1.3.6.1.4.1.48690.1.3.0</td>
<td>.1.3.6.1.4.1.48690.1.3.0</td>
<td>Modem manufacturer</td>
<td>Device product (ordering) code</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemRevision.0</td>
<td>batchNumber</td>
<td>.1.3.6.1.4.1.48690.1.4.0</td>
<td>.1.3.6.1.4.1.48690.1.4.0</td>
<td>Modem revision</td>
<td>Device batch number</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemSerial.0</td>
<td>hardwareRevision</td>
<td>.1.3.6.1.4.1.48690.1.5.0</td>
<td>.1.3.6.1.4.1.48690.1.5.0</td>
<td>Modem serial number</td>
<td>Device hardware revision</td>
</tr>
</tr>
<tr>
<tr>
<td>Imsi.0</td>
<td>fwVersion</td>
<td>.1.3.6.1.4.1.48690.1.6.0</td>
<td>.1.3.6.1.4.1.48690.1.6.0</td>
<td>Modem IMSI</td>
<td>Device RutOS firmware version</td>
</tr>
</tr>{{#ifeq: {{{mobile}}} | 1 |
<tr>
<tr>
<td>RouterName.0</td>
<th>Mobile</th>
<td>.1.3.6.1.4.1.48690.1.7.0</td>
<th></th>
<td>Router's name</td>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>ProductCode.0</td>
<td>modemNum</td>
<td>.1.3.6.1.4.1.48690.2.1.0</td>
<td>.1.3.6.1.4.1.48690.2.1.0</td>
<td>SIM card status</td>
<td>The number of modems (regardless of their current state) present on this system</td>
</tr>
</tr>
<tr>
<tr>
<td>PinState.0</td>
<td>mIndex</td>
<td>.1.3.6.1.4.1.48690.2.2.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.1.1</td>
<td>PIN status</td>
<td>Available modem indexes; used to index OIDs between when the device has multiple modems</td>
</tr>
</tr>
<tr>
<tr>
<td>NetState.0</td>
<td>mDescr</td>
<td>.1.3.6.1.4.1.48690.2.3.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.2.1</td>
<td>Mobile network registration status</td>
<td>Modem description</td>
</tr>
</tr>
<tr>
<tr>
<td>Signal.0</td>
<td>mImei</td>
<td>.1.3.6.1.4.1.48690.2.4.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.3.1</td>
<td>Signal strength level</td>
<td>Modem IMEI</td>
</tr>
</tr>
<tr>
<tr>
<td>Operator.0</td>
<td>mModel</td>
<td>.1.3.6.1.4.1.48690.2.5.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.4.1</td>
<td>Operator currently in use</td>
<td>Modem model</td>
</tr>
</tr>
<tr>
<tr>
<td>OperatorNumber.0</td>
<td>mManufacturer</td>
<td>.1.3.6.1.4.1.48690.2.6.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.5.1</td>
<td>Operator number (MCC+MNC)</td>
<td>Modem manufacturer</td>
</tr>
</tr>
<tr>
<tr>
<td>ConnectionState.0</td>
<td>mRevision</td>
<td>.1.3.6.1.4.1.48690.2.7.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.6.1</td>
<td>Data session connection state</td>
<td>Modem firmware version</td>
</tr>
</tr>
<tr>
<tr>
<td>ConnectionType.0</td>
<td>mSerial</td>
<td>.1.3.6.1.4.1.48690.2.8.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.7.1</td>
<td>Data session connection type</td>
<td>Modem serial number</td>
</tr>
</tr>
<tr>
<tr>
<td>Temperature.0</td>
<td>mIMSI</td>
<td>.1.3.6.1.4.1.48690.2.9.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.8.1</td>
<td>Modem's temperature in 0.1 degrees Celsius</td>
<td>Modem IMSI number</td>
</tr>
</tr>
<tr>
<tr>
<td>ReceivedToday.0</td>
<td>mSimState</td>
<td>.1.3.6.1.4.1.48690.2.10.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.9.1</td>
<td>Tee current day's RX packet count</td>
<td>SIM card status</td>
</tr>
</tr>
<tr>
<tr>
<td>SentToday.0</td>
<td>mPinState</td>
<td>.1.3.6.1.4.1.48690.2.11.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.10.1</td>
<td>The current day's TX packet count</td>
<td>PIN status</td>
</tr>
</tr>
<tr>
<tr>
<td>ReceivedYesterday.0</td>
<td>mNetState</td>
<td>.1.3.6.1.4.1.48690.2.12.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.11.1</td>
<td>Yesterday's RX packet count</td>
<td>Mobile network registration status</td>
</tr>
</tr>
<tr>
<tr>
<td>SentYesterday.0</td>
<td>mSignal</td>
<td>.1.3.6.1.4.1.48690.2.13.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.12.1</td>
<td>Yesterday's TX packet count</td>
<td>Signal strength level</td>
</tr>
</tr>
<tr>
<tr>
<td>FirmwareVersion.0</td>
<td>mOperator</td>
<td>.1.3.6.1.4.1.48690.2.14.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.13.1</td>
<td>Router's Firmware version</td>
<td>Current mobile network operator</td>
</tr>
</tr>
<tr>
<tr>
<td>SimSlot.0</td>
<td>mOperatorNumber</td>
<td>.1.3.6.1.4.1.48690.2.15.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.14.1</td>
<td>SIM slot currently in use</td>
<td>Mobile operator number (MCC+MNC)</td>
</tr>
</tr>
<tr>
<tr>
<td>RouterUptime.0</td>
<td>mConnectionState</td>
<td>.1.3.6.1.4.1.48690.2.16.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.15.1</td>
<td>Router up-time in seconds</td>
<td>Mobile data connection state</td>
</tr>
</tr>
<tr>
<tr>
<td>ConnectionUptime.0</td>
<td>mConnectionType</td>
<td>.1.3.6.1.4.1.48690.2.17.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.16.1</td>
<td>Mobile connection up-time in seconds</td>
<td>Mobile data connection type</td>
</tr>
</tr>
<tr>
<tr>
<td>MobileIP.0</td>
<td>mTemperature</td>
<td>.1.3.6.1.4.1.48690.2.18.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.17.1</td>
<td>IP address of the mobile interface</td>
<td>Modem's temperature in 0.1 degrees Celsius</td>
</tr>
</tr>
<tr>
<tr>
<td>Sent.0</td>
<td>mCellID</td>
<td>.1.3.6.1.4.1.48690.2.19.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.18.1</td>
<td>The amount of data sent through the mobile interface</td>
<td>Cell (Base transceiver station) ID</td>
</tr>
</tr>
<tr>
<tr>
<td>Received.0</td>
<td>mSINR</td>
<td>.1.3.6.1.4.1.48690.2.20.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.19.1</td>
<td>SINR value in dB</td>
<td>SINR value in dB</td>
</tr>
</tr>
<tr>
<tr>
<td>RSRP.0</td>
<td>mRSRP</td>
<td>.1.3.6.1.4.1.48690.2.23.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.20.1</td>
<td>RSRP value in dBm</td>
<td>RSRP value in dBm</td>
</tr>
</tr>
<tr>
<tr>
<td>RSRQ.0</td>
<td>mRSRQ</td>
<td>.1.3.6.1.4.1.48690.2.24.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.21.1</td>
<td>RSRQ value in dB</td>
<td>RSRQ value in dB</td>
</tr>
</tr>|}}{{#ifeq: {{{gps}}} | 1 |
<tr>
<tr>
<td>hotSpotId.0</td>
<th>GPS</th>
<td>.1.3.6.1.4.1.48690.3.4.1.0</td>
<th></th>
<td>Hotspot ID</td>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotSsid.0</td>
<td>latitude</td>
<td>.1.3.6.1.4.1.48690.3.4.2.0</td>
<td>.1.3.6.1.4.1.48690.3.1.0</td>
<td>Hotspot SSID</td>
<td>GPS Latitude value</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotEnableState.0</td>
<td>longitude</td>
<td>.1.3.6.1.4.1.48690.3.4.3.0</td>
<td>.1.3.6.1.4.1.48690.3.2.0</td>
<td>Hotspot status (enabled or disabled)</td>
<td>GPS Longitude value</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotIP.0</td>
<td>accuracy</td>
<td>.1.3.6.1.4.1.48690.3.4.4.0</td>
<td>.1.3.6.1.4.1.48690.3.3.0</td>
<td>Hotspot interface IP address</td>
<td>GPS coordinate accuracy</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotDownloadBandWidth.0</td>
<td>datetime</td>
<td>.1.3.6.1.4.1.48690.3.4.5.0</td>
<td>.1.3.6.1.4.1.48690.3.4.0</td>
<td>Hotspot download bandwidth</td>
<td>GPS coordinate fix time</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUploadBandWidth.0</td>
<td>numSatellites</td>
<td>.1.3.6.1.4.1.48690.3.4.6.0</td>
<td>.1.3.6.1.4.1.48690.3.5.0</td>
<td>Hotspot upload bandwidth</td>
<td>Number of available GPS satelites</td>
</tr>
</tr>|}}{{#ifeq: {{{hotspot}}} | 1 |
<tr>
<tr>
<td>hotSpotUsers.0</td>
<th>Hotspot</th>
<td>.1.3.6.1.4.1.48690.3.4.7.0</td>
<th></th>
<td>Hotspot users list</td>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersPass.0</td>
<td>hsState</td>
<td>.1.3.6.1.4.1.48690.3.4.8.0 </td>
<td>.1.3.6.1.4.1.48690.5.1.0</td>
<td>Hotspot users password list </td>
<td>Current Hotspot state</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersActive.0</td>
<td>hsIP</td>
<td>.1.3.6.1.4.1.48690.3.4.9.0</td>
<td>.1.3.6.1.4.1.48690.5.2.0</td>
<td>List of active Hotspot users</td>
<td>Hotspot IP address</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersMac.0</td>
<td>hsNet</td>
<td>.1.3.6.1.4.1.48690.3.4.10.0</td>
<td>.1.3.6.1.4.1.48690.5.3.0</td>
<td>Hotspot users MAC address list</td>
<td>WiFi interface ID</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersIp.0</td>
<td>hsAuth</td>
<td>.1.3.6.1.4.1.48690.3.4.11.0</td>
<td>.1.3.6.1.4.1.48690.5.4.0</td>
<td>Hotspot users IP address list</td>
<td>Hotspot authentication type</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersStartTime.0</td>
<td>hsSessionCount</td>
<td>.1.3.6.1.4.1.48690.3.4.12.0</td>
<td>.1.3.6.1.4.1.48690.5.5.0</td>
<td>Hotspot users log in time list</td>
<td>Hotspot current active session (connected user) count</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersUseTime.0</td>
<th>Hotspot Sessions</th>
<td>.1.3.6.1.4.1.48690.3.4.13.0</td>
<th></th>
<td>Hotspot users log in up-time list</td>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersDownload</td>
<td>hssIndex</td>
<td>.0.1.3.6.1.4.1.48690.3.4.14.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.1.1</td>
<td>Hotspot users downloaded data count</td>
<td>Connected Hotspot user indexes</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersUpload.0</td>
<td>hssMAC</td>
<td>.1.3.6.1.4.1.48690.3.4.15.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.2.1</td>
<td>Hotspot users uploaded data count</td>
<td>Hotspot user MAC addresses</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotEndTime.0</td>
<td>hssIP</td>
<td>.1.3.6.1.4.1.48690.3.4.16.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.3.1</td>
<td>Hotspot</td>
<td>Hotspot user local IP addresses</td>
</tr>
</tr>
<tr>
<tr>
<td>DigitalInput.0</td>
<td>hssID</td>
<td>.1.3.6.1.4.1.48690.5.1.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.4.1</td>
<td>Digital input state</td>
<td>Hotspot user session unique IDs</td>
</tr>
</tr>
<tr>
<tr>
<td>DigitalIsolatedInput.0</td>
<td>hssUsername</td>
<td>.1.3.6.1.4.1.48690.5.2.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.5.1</td>
<td>Digital isolated input state</td>
<td>Hotspot connected user usernames</td>
</tr>
</tr>
<tr>
<tr>
<td>AnalogInput.0</td>
<td>hssState</td>
<td>.1.3.6.1.4.1.48690.5.3.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.6.1</td>
<td>Analog input state</td>
<td>Hotspot user session states</td>
</tr>
</tr>
<tr>
<tr>
<td>DigitalOCOutput.0</td>
<td>hssDwLimit</td>
<td>.1.3.6.1.4.1.48690.5.4.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.7.1</td>
<td>Digital OC output state</td>
<td>Hotspot user download limits</td>
</tr>
</tr>
<tr>
<tr>
<td>DigitalRelayOutput.0</td>
<td>hssUpLimit</td>
<td>.1.3.6.1.4.1.48690.5.5.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.8.1</td>
<td>Digital Relay output state</td>
<td>Hotspot user upload limits</td>
</tr>
</tr>
<tr>
<tr>
<td>AnalogInputCalc.0</td>
<td>hssTimeLimit</td>
<td>.1.3.6.1.4.1.48690.5.6.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.9.1</td>
<td>Analog input value</td>
<td>Hotspot user session time limit</td>
</tr>
</tr>
<tr>
<tr>
<td>Longtitude.0</td>
<td>hssIdleTimeout</td>
<td>.1.3.6.1.4.1.48690.6.1.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.10.1</td>
<td>Hotspot user maximum idle timeout values</td>
<td>GPS Latitude value</td>
</tr>
</tr>
<tr>
<tr>
<td>Accuracy.0</td>
<td>hssDwBandwidth</td>
<td>.1.3.6.1.4.1.48690.6.3.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.11.1</td>
<td>GPS coordinate accuracy</td>
<td>Hotspot user maximum download speed</td>
</tr>
</tr>
<tr>
<tr>
<td>Datetime.0</td>
<td>hssUpBandwidth</td>
<td>.1.3.6.1.4.1.48690.6.4.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.12.1</td>
<td>GPS coordinate fix time</td>
<td>Hotspot user maximum upload speed</td>
</tr>
</tr>
<tr>
<tr>
<td>NumSatellites.0</td>
<td>hssURL</td>
<td>.1.3.6.1.4.1.48690.6.5.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.13.1</td>
<td>Number of GPS satelites</td>
<td>Hotspot URL</td>
</tr>
</tr>|}}
</table>
</table>
[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]
