Line 1: |
Line 1: |
− | <!-- Template uses {{{name}}}, {{{series}}}, and if device doesnt have mobile then {{{mobile}}} = 0--> | + | <!-- Template uses {{{name}}}, {{{series}}}, and if device doesn't have mobile then {{{mobile}}} = 0--> |
− | {{Template:Networking_rutos_manual_fw_disclosure | + | {{Template: Networking_rutos_manual_fw_disclosure |
− | | fw_version = {{{series}}}_R_00.02.05 | + | | fw_version ={{Template: Networking_rutos_manual_latest_fw |
− | | series = {{{series}}} | + | | series = {{{series}}} |
| + | | name = {{{name}}} |
| + | }} |
| }} | | }} |
− | | + | {{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} SNMP (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}} |
| + | {{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} SNMP (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}} |
| ==Summary== | | ==Summary== |
| | | |
| <b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices. | | <b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices. |
| + | {{#switch: {{{series}}} | RUTX|TRB1|TRB5=|#default= |
| + | <u><b> |
| + | |
| + | Note:</b> SNMP is additional software that can be installed from the <b>Services → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u> |
| + | }} |
| | | |
| {{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer | | {{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer |
Line 38: |
Line 46: |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Protocol</td> | + | <td>IP family</td> |
− | <td>UDP | TCP; default: '''UDP'''</td> | + | <td>IPv4 | IPv6 | IPv4v6; default: '''IPv4'''</td> |
− | <td>SNMP service's protocol.</td> | + | <td>IP family used by SNMP.</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
Line 207: |
Line 215: |
| <td>ip; default: <b>none</b></td> | | <td>ip; default: <b>none</b></td> |
| <td>Netmask for IP of the community.</td> | | <td>Netmask for IP of the community.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>Access Mode</td> |
| + | <td>Read-Only | Read-Write; default: <b>Read-Only</b></td> |
| + | <td>Access mode for current community.</td> |
| + | </tr> |
| + | </table> |
| + | |
| + | SNMPv6 community configuration page: |
| + | |
| + | [[File:Networking_rutos_manual_snmp_communities_snmpv6_community_configuration.png|border|class=tlt-border]] |
| + | |
| + | <table class="nd-mantable"> |
| + | <tr> |
| + | <th>Field</th> |
| + | <th>Value</th> |
| + | <th>Description</th> |
| + | </tr> |
| + | <tr> |
| + | <td>Community name</td> |
| + | <td>string; default: <b>none</b></td> |
| + | <td>Name of the community.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>Source</td> |
| + | <td>ip6 | domain name; default: <b>default</b></td> |
| + | <td>Source of the community.</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
Line 273: |
Line 308: |
| | | |
| [[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]] | | [[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]] |
− |
| |
− | You can then edit the trap rule by clicking the 'Edit' button next to it.
| |
− |
| |
− | [[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_edit_button.png|border|class=tlt-border]]
| |
| | | |
| You should be redirected to the rule's configuration page which should look something like this: | | You should be redirected to the rule's configuration page which should look something like this: |
Line 337: |
Line 368: |
| <tr> | | <tr> |
| <th>field name</th> | | <th>field name</th> |
− | <th>value</th> | + | <th>value1</th> |
| <th>description</th> | | <th>description</th> |
| </tr> | | </tr> |
Line 359: |
Line 390: |
| <tr> | | <tr> |
| <td>Input/Output name</td> | | <td>Input/Output name</td> |
− | <td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td> | + | <td>Output(4) {{!}} Input(3); default: <b>Output(4)</b></td> |
| <td>Which type of Inputs and Outputs to use in this rule.</td> | | <td>Which type of Inputs and Outputs to use in this rule.</td> |
| </tr> | | </tr> |
Line 465: |
Line 496: |
| <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td> | | <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td> |
| <td>On which Input/Output state will this rule be triggered.</td> | | <td>On which Input/Output state will this rule be triggered.</td> |
| + | </tr>}} |
| + | |RUT36X = |
| + | <tr> |
| + | <td>Input/Output type</td> |
| + | <td>Input/Output; default: <b>Input/Output</b></td> |
| + | <td>Which type of Inputs and Outputs to use in this rule.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>Input/Output name</td> |
| + | <td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td> |
| + | <td>Which type of Inputs and Outputs to use in this rule.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>State change</td> |
| + | <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td> |
| + | <td>On which Input/Output state will this rule be triggered.</td> |
| + | </tr> |
| + | |RUT9 = |
| + | {{#ifeq:{{{name}}}|RUT955| |
| + | <tr> |
| + | <td>Input/Output type</td> |
| + | <td><span style="color:blue">Input/Output</span> {{!}} <span style="color:forestgreen"><b>Relay</b></span> {{!}} <span style="color:darkred"><b>4–20 mA Current Loop</b></span> {{!}} <span style="color:chocolate">ADC</span>; default: <b>Input/Output</b></td> |
| + | <td>Which type of Inputs and Outputs to use in this rule.</td> |
| + | </tr> |
| + | <tr> |
| + | <td><span style="color:blue">Input/Output:</span> Input/Output name</td> |
| + | <td>Input (3) {{!}} Input (1) {{!}} Output(4) {{!}} Isolated Output (3,4,8) {{!}} Isolate Input (2,7); default: <b>Input (3)</b></td> |
| + | <td>Which type of Inputs and Outputs to use in this rule.</td> |
| + | </tr> |
| + | <tr> |
| + | <td><span style="color:blue">Input/Output:</span> State change</td> |
| + | <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td> |
| + | <td>On which Input/Output state will this rule be triggered.</td> |
| + | </tr> |
| + | <tr> |
| + | <td><span style="color:forestgreen">Relay:</span> Input/Output name</td> |
| + | <td>Relay(5,10); default: <b>Relay(5,10)</b></td> |
| + | <td>Which type of Inputs and Outputs to use in this rule.</td> |
| + | </tr> |
| + | <tr> |
| + | <td><span style="color:forestgreen">Relay:</span> State change</td> |
| + | <td>Open {{!}} Closed {{!}} Both; default: <b>Open</b></td> |
| + | <td>On which Input/Output state will this rule be triggered.</td> |
| + | </tr> |
| + | <tr> |
| + | <td><span style="color:darkred">4–20 mA Current Loop:</span> Input/Output name</td> |
| + | <td>Analog Current Loop (6,9); default: <b>Analog Current Loop (6,9)</b></td> |
| + | <td>Which type of Inputs and Outputs to use in this rule.</td> |
| + | </tr> |
| + | <tr> |
| + | <td><span style="color:darkred">4–20 mA Current Loop:</span> Voltage</td> |
| + | <td>positive float [0..40]; default: <b>none</b></td> |
| + | <td>At which voltage value will this rule be triggered.</td> |
| + | </tr> |
| + | <tr> |
| + | <td><span style="color:chocolate">ADC:</span> Input/Output name</td> |
| + | <td>Analog Input (6,9); default: <b>Analog Input (6,9)</b></td> |
| + | <td>Which type of Inputs and Outputs to use in this rule.</td> |
| + | </tr> |
| + | <tr> |
| + | <td><span style="color:chocolate">ADC:</span> Voltage</td> |
| + | <td>positive float [0..40]; default: <b>none</b></td> |
| + | <td>At which voltage value will this rule be triggered.</td> |
| </tr> | | </tr> |
− | |RUT3 = | + | | |
| <tr> | | <tr> |
| <td>Input/Output type</td> | | <td>Input/Output type</td> |
Line 496: |
Line 590: |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ModemImei.0</td> | + | <th>Device</th> |
| + | <th></th> |
| + | <th></th> |
| + | </tr> |
| + | <tr> |
| + | <td>serial</td> |
| <td>.1.3.6.1.4.1.48690.1.1.0</td> | | <td>.1.3.6.1.4.1.48690.1.1.0</td> |
− | <td>Modem IMEI</td> | + | <td>Device serial number</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ModemModel.0</td> | + | <td>routerName.0</td> |
| <td>.1.3.6.1.4.1.48690.1.2.0</td> | | <td>.1.3.6.1.4.1.48690.1.2.0</td> |
− | <td>Modem model</td> | + | <td>Device name</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ModemManufacturer.0</td> | + | <td>productCode</td> |
| <td>.1.3.6.1.4.1.48690.1.3.0</td> | | <td>.1.3.6.1.4.1.48690.1.3.0</td> |
− | <td>Modem manufacturer</td> | + | <td>Device product (ordering) code</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ModemRevision.0</td> | + | <td>batchNumber</td> |
| <td>.1.3.6.1.4.1.48690.1.4.0</td> | | <td>.1.3.6.1.4.1.48690.1.4.0</td> |
− | <td>Modem revision</td> | + | <td>Device batch number</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ModemSerial.0</td> | + | <td>hardwareRevision</td> |
| <td>.1.3.6.1.4.1.48690.1.5.0</td> | | <td>.1.3.6.1.4.1.48690.1.5.0</td> |
− | <td>Modem serial number</td> | + | <td>Device hardware revision</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Imsi.0</td> | + | <td>fwVersion</td> |
| <td>.1.3.6.1.4.1.48690.1.6.0</td> | | <td>.1.3.6.1.4.1.48690.1.6.0</td> |
− | <td>Modem IMSI</td> | + | <td>Device RutOS firmware version</td> |
− | </tr> | + | </tr>{{#ifeq: {{{mobile}}} | 1 | |
| <tr> | | <tr> |
− | <td>RouterName.0</td> | + | <th>Mobile</th> |
− | <td>.1.3.6.1.4.1.48690.1.7.0</td> | + | <th></th> |
− | <td>Router's name</td> | + | <th></th> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ProductCode.0</td> | + | <td>modemNum</td> |
− | <td>.1.3.6.1.4.1.48690.1.8.0</td>
| |
− | <td>Router's Product code</td>
| |
− | </tr>
| |
− | <tr>
| |
− | <td>BatchNumber.0</td>
| |
− | <td>.1.3.6.1.4.1.48690.1.9.0</td>
| |
− | <td>Router's batch number</td>
| |
− | </tr>
| |
− | <tr>
| |
− | <td>HardwareRevision.0</td>
| |
− | <td>.1.3.6.1.4.1.48690.1.10.0</td>
| |
− | <td>Router's Hardware Revision number</td>
| |
− | </tr>
| |
− | <tr>
| |
− | <td>SimState.0</td>
| |
| <td>.1.3.6.1.4.1.48690.2.1.0</td> | | <td>.1.3.6.1.4.1.48690.2.1.0</td> |
− | <td>SIM card status</td> | + | <td>The number of modems (regardless of their current state) present on this system</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>PinState.0</td> | + | <td>mIndex</td> |
− | <td>.1.3.6.1.4.1.48690.2.2.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.1.1</td> |
− | <td>PIN status</td> | + | <td>Available modem indexes; used to index OIDs between when the device has multiple modems</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>NetState.0</td> | + | <td>mDescr</td> |
− | <td>.1.3.6.1.4.1.48690.2.3.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.2.1</td> |
− | <td>Mobile network registration status</td> | + | <td>Modem description</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Signal.0</td> | + | <td>mImei</td> |
− | <td>.1.3.6.1.4.1.48690.2.4.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.3.1</td> |
− | <td>Signal strength level</td> | + | <td>Modem IMEI</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Operator.0</td> | + | <td>mModel</td> |
− | <td>.1.3.6.1.4.1.48690.2.5.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.4.1</td> |
− | <td>Operator currently in use</td> | + | <td>Modem model</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>OperatorNumber.0</td> | + | <td>mManufacturer</td> |
− | <td>.1.3.6.1.4.1.48690.2.6.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.5.1</td> |
− | <td>Operator number (MCC+MNC)</td> | + | <td>Modem manufacturer</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ConnectionState.0</td> | + | <td>mRevision</td> |
− | <td>.1.3.6.1.4.1.48690.2.7.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.6.1</td> |
− | <td>Data session connection state</td> | + | <td>Modem firmware version</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ConnectionType.0</td> | + | <td>mSerial</td> |
− | <td>.1.3.6.1.4.1.48690.2.8.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.7.1</td> |
− | <td>Data session connection type</td> | + | <td>Modem serial number</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Temperature.0</td> | + | <td>mIMSI</td> |
− | <td>.1.3.6.1.4.1.48690.2.9.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.8.1</td> |
− | <td>Modem's temperature in 0.1 degrees Celsius</td> | + | <td>Modem IMSI number</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ReceivedToday.0</td> | + | <td>mSimState</td> |
− | <td>.1.3.6.1.4.1.48690.2.10.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.9.1</td> |
− | <td>Tee current day's RX packet count</td> | + | <td>SIM card status</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>SentToday.0</td> | + | <td>mPinState</td> |
− | <td>.1.3.6.1.4.1.48690.2.11.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.10.1</td> |
− | <td>The current day's TX packet count</td> | + | <td>PIN status</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ReceivedYesterday.0</td> | + | <td>mNetState</td> |
− | <td>.1.3.6.1.4.1.48690.2.12.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.11.1</td> |
− | <td>Yesterday's RX packet count</td> | + | <td>Mobile network registration status</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>SentYesterday.0</td> | + | <td>mSignal</td> |
− | <td>.1.3.6.1.4.1.48690.2.13.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.12.1</td> |
− | <td>Yesterday's TX packet count</td> | + | <td>Signal strength level</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>FirmwareVersion.0</td> | + | <td>mOperator</td> |
− | <td>.1.3.6.1.4.1.48690.2.14.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.13.1</td> |
− | <td>Router's Firmware version</td> | + | <td>Current mobile network operator</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>SimSlot.0</td> | + | <td>mOperatorNumber</td> |
− | <td>.1.3.6.1.4.1.48690.2.15.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.14.1</td> |
− | <td>SIM slot currently in use</td> | + | <td>Mobile operator number (MCC+MNC)</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>RouterUptime.0</td> | + | <td>mConnectionState</td> |
− | <td>.1.3.6.1.4.1.48690.2.16.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.15.1</td> |
− | <td>Router up-time in seconds</td> | + | <td>Mobile data connection state</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>ConnectionUptime.0</td> | + | <td>mConnectionType</td> |
− | <td>.1.3.6.1.4.1.48690.2.17.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.16.1</td> |
− | <td>Mobile connection up-time in seconds</td> | + | <td>Mobile data connection type</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>MobileIP.0</td> | + | <td>mTemperature</td> |
− | <td>.1.3.6.1.4.1.48690.2.18.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.17.1</td> |
− | <td>IP address of the mobile interface</td> | + | <td>Modem's temperature in 0.1 degrees Celsius</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Sent.0</td> | + | <td>mCellID</td> |
− | <td>.1.3.6.1.4.1.48690.2.19.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.18.1</td> |
− | <td>The amount of data sent through the mobile interface</td> | + | <td>Cell (Base transceiver station) ID</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Received.0</td> | + | <td>mSINR</td> |
− | <td>.1.3.6.1.4.1.48690.2.20.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.19.1</td> |
− | <td>The amount of data received through the mobile interface</td>
| |
− | </tr>
| |
− | <tr>
| |
− | <td>CellID.0</td>
| |
− | <td>.1.3.6.1.4.1.48690.2.21.0</td>
| |
− | <td>ID of the current mobile operator's cell </td>
| |
− | </tr>
| |
− | <tr>
| |
− | <td>SINR.0</td>
| |
− | <td>.1.3.6.1.4.1.48690.2.22.0</td>
| |
| <td>SINR value in dB</td> | | <td>SINR value in dB</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>RSRP.0</td> | + | <td>mRSRP</td> |
− | <td>.1.3.6.1.4.1.48690.2.23.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.20.1</td> |
| <td>RSRP value in dBm</td> | | <td>RSRP value in dBm</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>RSRQ.0</td> | + | <td>mRSRQ</td> |
− | <td>.1.3.6.1.4.1.48690.2.24.0</td> | + | <td>.1.3.6.1.4.1.48690.2.2.1.21.1</td> |
| <td>RSRQ value in dB</td> | | <td>RSRQ value in dB</td> |
− | </tr> | + | </tr>|}}{{#ifeq: {{{gps}}} | 1 | |
| <tr> | | <tr> |
− | <td>hotSpotId.0</td> | + | <th>GPS</th> |
− | <td>.1.3.6.1.4.1.48690.3.4.1.0</td> | + | <th></th> |
− | <td>Hotspot ID</td> | + | <th></th> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotSsid.0</td> | + | <td>latitude</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.2.0</td> | + | <td>.1.3.6.1.4.1.48690.3.1.0</td> |
− | <td>Hotspot SSID</td> | + | <td>GPS Latitude value</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotEnableState.0</td> | + | <td>longitude</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.3.0</td> | + | <td>.1.3.6.1.4.1.48690.3.2.0</td> |
− | <td>Hotspot status (enabled or disabled)</td> | + | <td>GPS Longitude value</td> |
| </tr> | | </tr> |
| + | |
| <tr> | | <tr> |
− | <td>hotSpotIP.0</td> | + | <td>accuracy</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.4.0</td> | + | <td>.1.3.6.1.4.1.48690.3.3.0</td> |
− | <td>Hotspot interface IP address</td> | + | <td>GPS coordinate accuracy</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotDownloadBandWidth.0</td> | + | <td>datetime</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.5.0</td> | + | <td>.1.3.6.1.4.1.48690.3.4.0</td> |
− | <td>Hotspot download bandwidth</td> | + | <td>GPS coordinate fix time</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUploadBandWidth.0</td> | + | <td>numSatellites</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.6.0</td> | + | <td>.1.3.6.1.4.1.48690.3.5.0</td> |
− | <td>Hotspot upload bandwidth</td> | + | <td>Number of available GPS satelites</td> |
− | </tr> | + | </tr>|}}{{#ifeq: {{{hotspot}}} | 1 | |
| <tr> | | <tr> |
− | <td>hotSpotUsers.0</td> | + | <th>Hotspot</th> |
− | <td>.1.3.6.1.4.1.48690.3.4.7.0</td> | + | <th></th> |
− | <td>Hotspot users list</td> | + | <th></th> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUsersPass.0</td> | + | <td>hsState</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.8.0 </td> | + | <td>.1.3.6.1.4.1.48690.5.1.0</td> |
− | <td>Hotspot users password list </td> | + | <td>Current Hotspot state</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUsersActive.0</td> | + | <td>hsIP</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.9.0</td> | + | <td>.1.3.6.1.4.1.48690.5.2.0</td> |
− | <td>List of active Hotspot users</td> | + | <td>Hotspot IP address</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUsersMac.0</td> | + | <td>hsNet</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.10.0</td> | + | <td>.1.3.6.1.4.1.48690.5.3.0</td> |
− | <td>Hotspot users MAC address list</td> | + | <td>WiFi interface ID</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUsersIp.0</td> | + | <td>hsAuth</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.11.0</td> | + | <td>.1.3.6.1.4.1.48690.5.4.0</td> |
− | <td>Hotspot users IP address list</td> | + | <td>Hotspot authentication type</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUsersStartTime.0</td> | + | <td>hsSessionCount</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.12.0</td> | + | <td>.1.3.6.1.4.1.48690.5.5.0</td> |
− | <td>Hotspot users log in time list</td> | + | <td>Hotspot current active session (connected user) count</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUsersUseTime.0</td> | + | <th>Hotspot Sessions</th> |
− | <td>.1.3.6.1.4.1.48690.3.4.13.0</td> | + | <th></th> |
− | <td>Hotspot users log in up-time list</td> | + | <th></th> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUsersDownload</td> | + | <td>hssIndex</td> |
− | <td>.0.1.3.6.1.4.1.48690.3.4.14.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.1.1</td> |
− | <td>Hotspot users downloaded data count</td> | + | <td>Connected Hotspot user indexes</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotUsersUpload.0</td> | + | <td>hssMAC</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.15.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.2.1</td> |
− | <td>Hotspot users uploaded data count</td> | + | <td>Hotspot user MAC addresses</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>hotSpotEndTime.0</td> | + | <td>hssIP</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.16.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.3.1</td> |
− | <td>Hotspot</td> | + | <td>Hotspot user local IP addresses</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DigitalInput.0</td> | + | <td>hssID</td> |
− | <td>.1.3.6.1.4.1.48690.5.1.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.4.1</td> |
− | <td>Digital input state</td> | + | <td>Hotspot user session unique IDs</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DigitalIsolatedInput.0</td> | + | <td>hssUsername</td> |
− | <td>.1.3.6.1.4.1.48690.5.2.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.5.1</td> |
− | <td>Digital isolated input state</td> | + | <td>Hotspot connected user usernames</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>AnalogInput.0</td> | + | <td>hssState</td> |
− | <td>.1.3.6.1.4.1.48690.5.3.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.6.1</td> |
− | <td>Analog input state</td> | + | <td>Hotspot user session states</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DigitalOCOutput.0</td> | + | <td>hssDwLimit</td> |
− | <td>.1.3.6.1.4.1.48690.5.4.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.7.1</td> |
− | <td>Digital OC output state</td> | + | <td>Hotspot user download limits</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>DigitalRelayOutput.0</td> | + | <td>hssUpLimit</td> |
− | <td>.1.3.6.1.4.1.48690.5.5.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.8.1</td> |
− | <td>Digital Relay output state</td> | + | <td>Hotspot user upload limits</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>AnalogInputCalc.0</td> | + | <td>hssTimeLimit</td> |
− | <td>.1.3.6.1.4.1.48690.5.6.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.9.1</td> |
− | <td>Analog input value</td> | + | <td>Hotspot user session time limit</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Longtitude.0</td> | + | <td>hssIdleTimeout</td> |
− | <td>.1.3.6.1.4.1.48690.6.1.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.10.1</td> |
− | <td>GPS Longitude value</td>
| + | <td>Hotspot user maximum idle timeout values</td> |
− | </tr>
| |
− | <tr>
| |
− | <td>Latitude.0</td>
| |
− | <td>.1.3.6.1.4.1.48690.6.2.0</td>
| |
− | <td>GPS Latitude value</td> | |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Accuracy.0</td> | + | <td>hssDwBandwidth</td> |
− | <td>.1.3.6.1.4.1.48690.6.3.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.11.1</td> |
− | <td>GPS coordinate accuracy</td> | + | <td>Hotspot user maximum download speed</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>Datetime.0</td> | + | <td>hssUpBandwidth</td> |
− | <td>.1.3.6.1.4.1.48690.6.4.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.12.1</td> |
− | <td>GPS coordinate fix time</td> | + | <td>Hotspot user maximum upload speed</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>NumSatellites.0</td> | + | <td>hssURL</td> |
− | <td>.1.3.6.1.4.1.48690.6.5.0</td> | + | <td>.1.3.6.1.4.1.48690.5.6.1.13.1</td> |
− | <td>Number of GPS satelites</td> | + | <td>Hotspot URL</td> |
− | </tr> | + | </tr>|}} |
| </table> | | </table> |
| + | |
| [[Category:{{{name}}} Services section]] | | [[Category:{{{name}}} Services section]] |