31,703
edits
Changes
Template:Rms manual management device submenu add device (view source)
Revision as of 08:06, 22 August 2018
, 08:06, 22 August 2018no edit summary
* In the pop-up box select the desired profile, enter a custom device name, the device's serial number, LAN MAC address and click "Add device" (you can find the serial number and LAN MAC address on the device's package or in the router's WebUI, under System → Administration → RMS) or click the '''plus symbol''' located on the right of the box to add more devices at a time:
* In the pop-up box select the desired profile, enter a custom device name, the device's serial number, LAN MAC address and click "Add device" (you can find the serial number and LAN MAC address on the device's package or in the router's WebUI, under System → Administration → RMS) or click the '''plus symbol''' located on the right of the box to add more devices at a time:
[[File:Add device to rms part 3 v4.png]]
[[File:Add device to rms part 3 v4.png|1100px]]
----
----
* Don't forget to '''enable remote monitoring''' on the device(s) that you are trying to add. To do so, go to the router's WebUI and navigate to '''System → Administration → RMS''' and place a check mark next to the "Enable remote monitoring" field (detailed instructions provided '''[[How to enable remote access for RMS on the router?|here]]'''). This can be done either before or after clicking "Add device":
* Don't forget to '''enable remote monitoring''' on the device(s) that you are trying to add. To do so, go to the router's WebUI and navigate to '''System → Administration → RMS''' and place a check mark next to the "Enable remote monitoring" field (detailed instructions provided '''[[How to enable remote access for RMS on the router?|here]]'''). This can be done either before or after clicking "Add device":
* You can close the "Add device" box earlier if you wish. You should be able to see the newly added device in the device table. When the power button symbol next to it turns green, the system will have finished connecting it to RMS:
* You can close the "Add device" box earlier if you wish. You should be able to see the newly added device in the device table. When the power button symbol next to it turns green, the system will have finished connecting it to RMS:
[[File:Add device to rms part 5 v5.png]]
[[File:Add device to rms part 5 v5.png|1100px]]
