Changes

     </li>

     </li>

----

----

     <li>Don't forget to <b>enable remote monitoring</b> on the device(s) that you are trying to add. To do so, go to the WebUI, navigate to the <b>System → Administration → RMS</b> page and place a check mark next to the "Enable remote monitoring" field (detailed instructions provided <b>[[How to enable remote access for RMS on the router?|here]]</b>):<br>[[File:Networking rms manual management device add device part 4 v3.png]]

     <li>Don't forget to set the <b>Connection type</b> field the <b>Enabled</b> on the device(s) that you are trying to add. You can do that from the <b>System → Administration → RMS</b>:<br>[[File:Networking rms manual management device add device part 4 v3.png]]

     </li>

     </li>

----

----

     </li>

     </li>

----

----

     <li>You can close the box earlier if you wish. You should be able to see the newly added device in the device table. When status circle turns green, the system will have finished adding the device to RMS:<br>[[File:Networking rms manual management device add device part 5 v1.png]]

     <li>You can close the box earlier if you wish. You should be able to see the newly added device(s) in the device table. When status circle turns green, the system will have finished adding the device to RMS:<br>[[File:Networking rms manual management device add device part 5 v1.png]]

     </li>

     </li>

</ul>

</ul>