Changes

The '''Add device''' function is used to add RUT devices to your RMS profile's device table.

The '''Add device''' function is used to add RUT devices to your RMS profile's device table.

----

----

* To add a new device, scroll your mouse pointer to the Device submenu ('''Management → Device''') and click "Add device":

* To add a new device(s), scroll your mouse pointer to the Device submenu ('''Management → Device''') and click "Add device":

[[File:Add device to rms part 2 v3.png]]

[[File:Add device to rms part 2 v3.png]]

[[File:Add device to rms part 3 v4.png]]

[[File:Add device to rms part 3 v4.png]]

----

----

* Don't forget to '''enable remote monitoring''' on the device that you are trying to add. To do so, go to the router's WebUI and navigate to '''System → Administration → RMS''' and place a check mark next to the "Enable remote monitoring" field (detailed instructions provided '''[[How to enable remote access for RMS on the router?|here]]'''). This can be done either before or after clicking "Add device":

* Don't forget to '''enable remote monitoring''' on the device(s) that you are trying to add. To do so, go to the router's WebUI and navigate to '''System → Administration → RMS''' and place a check mark next to the "Enable remote monitoring" field (detailed instructions provided '''[[How to enable remote access for RMS on the router?|here]]'''). This can be done either before or after clicking "Add device":

[[File:Add device to rms part 1 v4.png]]

[[File:Add device to rms part 1 v4.png]]

----

----

* Allow up to 5 minutes for the system to finish adding the device. You will know the process is done when the word "Connected" appears under the Status field. You can then close the pop-up box:

* Allow up to 5 minutes for the system to finish adding the device. You will know the process is done when the word "Connected" appears under the Status field:

[[File:Add device to rms part 4 v3.png]]

[[File:Add device to rms part 4 v3.png]]