Template:Webui services rs232 rs232 configuration over ip table
FIELD NAME | VALUE | DESCRIPTION |
---|---|---|
Protocol | TCP; Default: TCP | Specifies the protocol used in the communication process |
Mode | Server | Client | Bidirect; Default: Server | Specifies the device's role in the connection: Server - the device waits for incoming connections Client - the device initiates the connection Bidirect - acts as client by default but waits for incoming connections at the same time |
No leading zeros | yes | no; Default: no | Specifies that the first hex zeros should be skipped |
Client settings: Server address | ip | host; Default: " " | The address of the server that client will connect to |
Client settings: TCP port | integer [0..65535]; Default: " " | The port number used to connect to the server |
Client settings: Reconnect interval (s) | integer; Default: " " | Indicates the time period (in seconds) between reconnection attempts |
Server settings: TCP port | integer [0..65535]; Default: " " | The TCP port number used to listen for incoming connections |
Server settings: Timeout (s) | integer; Default: " " | Disconnects clients after the amount of inactivity time (in seconds) specified in this field |
Output | OC Output | Relay Output; Default: OC Output | Output to indicate that the application switched from client (default) to server state (this field becomes visible only in Bidirect mode) |
Output state | 1 | 0; Default: 0 | Output state value during which the application reverts to server mode (this field becomes visible only in Bidirect mode) |