Changes

This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.

This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.

<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>Services → Package Manager</b> page.</u>

<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>System → Package Manager</b> page.</u>

==Prerequisites==

==Prerequisites==

<li>Two RUTOS devices (this example will be written with RUTX09 and TRB141 in particular)</li>

<li>Two RUTOS devices (this example will be written with RUTX09 and TRB141 in particular)</li>

<li>An end device to configure devices (PC, Laptop, Tablet or Smartphone)</li>

<li>An end device to configure devices (PC, Laptop, Tablet or Smartphone)</li>

<li>One end device must have <b>Public</b> IP address</li>

<li>One of the RUTOS devices must have <b>Public</b> IP address</li>

==End results==

==End results==