1,244
edits
Changes
WireGuard Configuration Example (view source)
Revision as of 16:33, 5 March 2021
, 16:33, 5 March 2021no edit summary
__TOC__
__TOC__
'''WireGuard''' is simple, fast, lean, and modern VPN that utilizes secure and trusted cryptography.
'''WireGuard''' is simple, fast, lean, and modern VPN that utilizes secure and trusted cryptography.
This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.
This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.
<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>Services → Package Manager</b> page</u> (in RUT9/RUT2 this page is located in <b>System → Package Manager</b>).
==Prerequisites==
==Prerequisites==
<b>Note:</b> the numbers in the images below represent a <i>number of field</i> from which that value
<b>Note:</b> the numbers in the images below represent a <i>number of field</i> from which that value
was taken from the images in [[WireGuard_Configuration_Example#Instance Configuration]].
was taken from the images in [[WireGuard_Configuration_Example#Instance Configuration|Instance Configuration]].
====RUTX09 Example====
====RUTX09 Example====
----
----
Lastly atleast one device has to enter Remote instance Public WAN IP address. Enter IP address, save and move to the [[WireGuard_Configuration_Example#Testing Configuration]].
Lastly atleast one device has to enter Public IP address from Remote instance. Enter IP address, save and move to the
[[WireGuard_Configuration_Example#Testing Configuration|Testing Configuration]].
If in the [[WireGuard_Configuration_Example#Instance Configuration|Instance Configuration]] you
specified port other than 51820 then you also need to specify it here.
[[File:Networking_wireguard_configuration_example_interface_peers_configuration_advanced_trb141_v1.png|border|class=tlt-border]]
[[File:Networking_wireguard_configuration_example_interface_peers_configuration_advanced_trb141_v1.png|border|class=tlt-border]]
==Testing Configuration==
==Testing Configuration==
To initiate connection and test it you need to open Command Line Interface (Services → CLI) and login.
Then type
wg
If you see <b>latest handshake</b> line then it means you have established a connection between your devices and
you are able to communicate via IP addresses specified in number <b>2</b> and <b>4</b> fields from the images in
[[WireGuard_Configuration_Example#Instance Configuration|Instance Configuration]].
[[File:Networking_wireguard_configuration_example_interface_wg_established_trb141_v1.png|border|class=tlt-border]]
If you dont see <b>latest handshake</b> line, then ping the <b>Public IP address</b> you specified in
<b>Endpoint Host</b> field, this will initiate handshake.
ping XX.XX.XX.XX
