Changes

===Mesh gateway===

===Mesh gateway===

This router must have access to the internet. The following settings should be enabled by default.  

This router must have access to the internet. The following settings should be enabled by default.  

# Access router‘s WebUI. Navigate to '''Network''' -> '''Interfaces'''.  

    <li>Access router‘s WebUI. Navigate to '''Network''' -> '''Interfaces'''.</li>

# Press the pencil icon on the right of the LAN interface.

    <li>Press the pencil icon on the right of the LAN interface.</li>

[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_v2.png|border|class=tlt-border]]

    [[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_v3.png|border|class=tlt-border]]

# If necessary, select Protocol in the General settings tab as Static.  

    <li>If necessary, select Protocol in the General settings tab as Static. </li>

# Enter IPv4 address, as well as subnet mask.

    <li>Enter IPv4 address, as well as subnet mask. </li>

#  Enable DHCP. Based on your requirements, edit DHCP limit and lease time or leave the rest of the settings as set by default.

    <li>Enable DHCP. Based on your requirements, edit DHCP limit and lease time or leave the rest of the settings as set by default. </li>

      

     <li></li>

===Mesh nodes===

===Mesh nodes===

In order to avoid conflicts, each node router needs to be leased their LAN IP by mesh gateway. To do so: Access router‘s WebUI.

In order to avoid conflicts, each node router needs to be leased their LAN IP by mesh gateway. To do so:

<ol>

<ol>

     <li>Access router‘s WebUI. Navigate to '''Network''' -> '''Interfaces'''.</li>  

     <li>Access router‘s WebUI. Navigate to '''Network''' -> '''Interfaces'''.</li>