90
edits
Changes
Wireless Mesh configuration example (view source)
Revision as of 11:52, 17 March 2022
, 11:52, 17 March 2022no edit summary
# Access router‘s WebUI. Navigate to '''Network''' -> '''Interfaces'''.
# Access router‘s WebUI. Navigate to '''Network''' -> '''Interfaces'''.
# Press the pencil icon on the right of the LAN interface.
# Press the pencil icon on the right of the LAN interface.
# If necessary, select Protocol in the General settings tab as Static.
# If necessary, select Protocol in the General settings tab as Static.
# Enter IPv4 address, as well as subnet mask.
# Enter IPv4 address, as well as subnet mask.
# Enable DHCP. Based on your requirements, edit DHCP limit and lease time or leave the rest of the settings as set by default.
# Enable DHCP. Based on your requirements, edit DHCP limit and lease time or leave the rest of the settings as set by default.
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_v2.png|border|class=tlt-border]]
===Mesh nodes===
===Mesh nodes===
In order to avoid conflicts, each node router needs to be leased their LAN IP by mesh gateway. To do so:
In order to avoid conflicts, each node router needs to be leased their LAN IP by mesh gateway. To do so: