Guglielmo LUMEN® AAA WiFi Setup

From Teltonika Networks Wiki

The information in this page is updated in accordance with firmware version R_00.07.00.

Introduction[edit | edit source]

Guglielmo LUMEN® AAA (Limitless Users Management Engine) is the WiFi Guest platform of Guglielmo S.r.l.. It is a solution able to provide all the functionalities needed by a modern tool to manage access to a WiFi Guest network. It allows to manage all the statistics generated by the network, both concerning the authentication or from a WiFi positioning service.

Guglielmo LUMEN® AAA has been designed to be independent from the WiFi vendor and it is therefore agnostic with respect to the existing WiFi infrastructure. It can be natively integrated with the main WiFi vendors, including Teltonika. This allows it to provide a WiFi Guest service without installing Guglielmo’s appliance at the customer premise.

This article contains instructions on how to setup a Hotspot on a RUT device with Guglielmo LUMEN® AAA Platform.

Configuration prerequisites[edit | edit source]


  • A RUT device with Hotspot*

* Note: On non-RUTX devices, Hotspot is additional software that can be installed from the Services → Package Manager page.

Configuring router[edit | edit source]

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rutx manual webui basic advanced mode.gif

STEP 1: Connect to router's WebUI, navigate to Network → Wireless and create a new Wireless AP or use an existing one. For the sake of this example, we will be using a new Access Point:

Networking rutos configuration example guglielmo aaa wireless ap example.png

STEP 2: Add a new Hotspot instance.

Navigate to Services → Hotspot and add a new Hotspot Instance. To do so, find the Add New Instance section and select your Wireless AP in the interface list, then press Add.

Networking rutos configuration example guglielmo aaa hotspot add new instance.png

STEP 3: Configure the Hotspot instance.

After adding the new instance, a configuration window should appear automatically. Then configure the instance:

  1. Enable the Hotspot instance toggle.
  2. Authentication mode - Radius.
  3. Landing page - External.
  4. Landing page address -
  5. Success page - Custom.
  6. Custom URL -

Networking rutos configuration example guglielmo aaa hotspot instance general settings.png

Navigate to the Radius section on the left, and configure the radius server according to your configuration. Your configuration will differ from the example image.

Networking rutos configuration example guglielmo aaa hotspot instance radius settings.png

Lastly, in Walled Garden section add to the list of URLs and press Save & Apply.

Networking rutos configuration example guglielmo aaa hotspot instance walled garden settings.png

Results[edit | edit source]

The created Hotspot instance should be up and running, ready for connection from clients.

Networking rutos configuration example guglielmo aaa hotspot instance overview.png

Testing configuration[edit | edit source]

Connect to the Hotspot Wireless AP with a device. In the landing page, log into the hotspot. Once logged in, a new device should appear on the Guglielmo LUMEN® AAA portal.

Networking rutos configuration example guglielmo aaa portal.png