RUT142 OPC UA Server

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT142 > RUT142 Manual > RUT142 WebUI > RUT142 Services section > RUT142 OPC UA Server

The information in this page is updated in accordance with firmware version RUT14X_R_00.07.07.2.


OPC Unified Architecture (OPC UA) is a cross-platform, open-source, IEC62541 standard for data exchange from sensors to cloud applications developed by the OPC Foundation. The UA in OPC UA stands for “Unified Architecture” and refers to the latest specification of the standard. It differs from its predecessor in that it is platform-independent, moving away from COM/DCOM to purely binary TCP/IP or alternatively SOAP.

This manual page provides an overview of the OPC UA Server in RUT142 devices.

Note: OPC UA Server is additional software that can be installed from the System → Package Manager page.

OPC UA Server Configuration

The OPC UA Server Configuration section is used to enable the local OPC UA server.

Networking rutos manual opcua server configuration.png

Field Value Description
Enable off | on; default: off Enables OPC UA server.
Port integer [1..65535]; default: none Service port.

OPC UA Server variables

All RUTOS device variables are described in the table below:

Note: All the variables have these qualities in common:

  • Namespace index is 1
  • Node ID type is string
  • Read-only
  • Updated upon request
ID Type Description
sys_uptime UINT32 System uptime in seconds.
sys_serial String Device serial number.
sys_devname String Device name.
sys_devcode String Device code.
sys_version String Firmware version.
sys_hostname String Hostname.
lan_mac String LAN MAC address.
lan_ip String IP address of LAN interface.
lan_mask String Subnet mask of LAN interface.
lan_gateway String Gateway IP address of LAN interface.
lan_dns Array of String IP addresses of LAN interface DNS servers.
wan_ip Array of String IP address of WAN interface.