RUT240 Custom Scripts

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT240 > RUT240 Manual > RUT240 WebUI > RUT240 System section > RUT240 Custom Scripts

The information in this page is updated in accordance with firmware version RUT2_R_00.07.02.


Note: click here for the old style WebUI (FW version RUT2XX_R_00.01.14.5 and earlier) user manual page.

Summary[edit source]

The User Scripts function allows users to write their own shell scripts that will be executed during the device's booting process. This page is an overview of the User Scripts function in RUT240 devices.

Startup Script[edit source]

The Startup Script section shows the contents of the /etc/rc.local file and allows the user to edit it. This scripts written in this file are executed at the end of the device's boot cycle. You can also execute the script via a command line interface with the following command:

sh /etc/rc.local

The figure below is an example of the Startup Script management section:

Networking rutos manual custom scripts startup script.png