RUT240 DHCP

From Teltonika Networks Wiki
Main Page > EOL Products > RUT240 > RUT240 Manual > RUT240 WebUI > RUT240 Network section > RUT240 DHCP

The information in this page is updated in accordance with firmware version RUT2_R_00.07.06.16.


Note: click here for the old style WebUI (FW version RUT2XX_R_00.01.14.7 and earlier) user manual page.

Summary

The DHCP page is used to to set up DHCP settings, which are used to connect device with external networks.

This manual page provides an overview of DHCP page in RUT240 devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

Static Leases

Static IP leases are used to reserve specific IP addresses for specific devices by binding them to their MAC address. This is useful when you have a stationary device connected to your network that you need to reach frequently, e.g., printer, IP phone, etc.

This page displays static IP leases currently existing on this device.

To make the Static Lease section visible, set interface protocol to Static.


The Static Lease list is empty by default. To add a new Static Lease click the 'Add' button.

Networking rutos manual dhcp static leases add button.png

Appears static lease, which should look similar to this:

Networking rutos manual dhcp static leases.png

Field Value Description
MAC mac; default: none MAC address of a device that will connect to this network interface.
IP ip; default: none The IP address that will be reserved for the specified device.
Description string; default: none Name of static lease.

After you click 'Save & Apply' static leases will be saved.