RUT240 Relay to Open Collector Output

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT240 > RUT240 Hardware Application Examples > RUT240 Relay to Open Collector Output

This page provides an example on how to connect a relay to a RUT240 device's open collector output.

Networking rut240 hardware examples relay to open collector output.png

Note: if you use different power supplies for RUT240 and relay, their ground wires must be connected together.

Note: some relays have internal protection diode D. When connecting such relay you mustn’t mix up coil contacts. If you mix up the relay coil contacts you might cause permanent damage to the open collector output.

See also