RUT241 Firmware Downloads

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT241 > RUT241 Firmware Downloads

This page contains firmware files for RUT241 devices. Look to the table below or the changelog to find download links.

Release Download link Release date Link to changelog entry MD5
Latest RUT2M_R_00.07.02 2022.05.23 click here 31e46e8ae6ea458c2526848ba705664c
Mass production RUT2M_R_00.07.01.4 2022.02.25 click here bceb73437f7b96ca39b1617502f2eecf


Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.

FW checksums[edit source]


Checksums for firmware files can be found here.

Changelog[edit | edit source]

RUT2M_R_00.07.02 | 2022.05.23[edit | edit source]

  • New features
    • Overview side widget
    • IGMP Proxy
    • Privileged Access Management (PAM)
    • AWS Greengrass support
    • HTTPS certificate and key upload feature
    • SSH public keys edit box
    • License page
    • DNP3 data for Data to Server
  • Improvements
    • Updated busybox to version: 1.34.1
    • Updated curl to version 7.79.1
    • Added iptables filter package for string filtering
    • Added CHAP authentication for L2TP VPN
    • Added IPv6 support for L2TPv3 VPN
    • Added EAP-MSCHAPV2 authentication method for IPsec VPN
    • Added IPv6 support to Auto Reboot
    • Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
    • Updated SNMP version 5.9.1
    • Added OpenSSL authentication options to SNMPv3
    • Added support for OSPF redistribution options and OSPF neighbors
    • Added password field to BGP Peers page
    • Extended BGP "AS" field validation to accept integers up to 4294967295
    • Added "DHE+RSA" to OpenVPN cipher selections
    • Increased OpenVPN max password length from 128 bytes to 512 bytes
    • Made HMAC key direction initial value dependent on the role of the instance (client or server)
    • Made HMAC key and HMAC authentication key upload fields required
    • Added DES to IPsec encryption algorithms selections
    • Added special character support for CHAP secrets
    • Added validation requirements for PPTP user list username field
    • Added option to manually enter Public key in Wireguard configuration
    • Made generating Wireguard keys possible only while in auto mode
    • Added Events Log database to troubleshoot archive
    • Added RFC1918 filter field
    • Added the possibility to unblock multiple blocked devices at once
    • Added 'Port' column to blocked login attempts table
    • Added Speedtest server refresh
    • Updated Speedtest server list
    • Added asterisk option to Site Blocking
    • Added MD5 and SHA256 checksums to package validation page
    • Changed certificate requirements to only require client key file if client certificate is used
    • Added pagination and data retention between table pages
    • Added pagination functionality to tables when there are more than 10 records
    • Improved table sorting by saving user provided sort settings in the browser
    • Improved drag and drop functionality
    • Added the possibility to drag and drop files onto upload components
    • Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
    • Added 'Strict-Transport-Security' response header for HTTPS
    • Added 'breadcrumbs' to modal windows
    • Improved initial WebUI loading after login
    • Added mobile bytes sent and bytes received SNMP OIDs
    • Added mobile LED turn off feature ('System -> Administration' page)
    • Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
    • Updated mobile usage data point calculation logic
    • Added the possibility to manually enter operator number
    • Improved obtain mobile cell ID process
    • Added modem restart if SIM card is removed during APN database fetching process
    • Added unauthorized call logging
    • Added space character support in SMS commands
    • Disabled SMS modem storage configuration form when SIM is not inserted
    • Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
    • Added external modem SMS limit Overview card and widget
    • Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
    • Added duplicate value check for list configuration options
    • Changed mobile card instance design
    • Fixed 'Mobile Data usage reset' SMS rule
    • Fixed the default state parameter of SMS list POST/GET command
    • Added Hotspot configuration profiles
    • Added local Hotspot user password hashing
    • Added Hotspot password encoding option
    • Improved Hotspot related firewall rule setting
    • Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
    • Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
    • Added ubus support to Hotspot
    • Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
    • Added I/O SNMP trap
    • Added ISO 8601 time format to I/O Juggler's '%ts' parameter
    • Added device name parameter '%pc' to I/O Juggler
    • Added PPPoE VLAN priority support
    • Made VRRP ping section dependent on main instance
    • Added 'WAN to LAN' switch
    • Added WAN field to VLAN configuration
  • Fixes
    • Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
    • Fixed CVE-2022-28391 busybox vulnerability
    • Fixed CVE-2018-16789 shellinabox vulnerability
    • Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
    • Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
    • Fixed zlib backport security issue
    • Fixed Wireguard firewall zone assignment
    • Fixed queued packages disappearing from list after FW upgrade with keep settings
    • Fixed error message display for multiple input validation rules
    • Fixed incorrect DHCP validation range for start and limit fields
    • Removed 'Bring up on boot' option from network interface configuration pages
    • Fixed coma-separated DHCP options disappearing after save
    • Fixed exclude and listen interfaces
    • Fixed 'Use broadcast flag' option saving
    • Fixed firewall zone assignment when creating new interfaces
    • Fixed OpenVPN 'Netmask' and 'IP address' field validations
    • Fixed OpenVPN TAP configuration saving issue
    • Fixed OpenVPN switching to TUN mode when uploading a configuration from file
    • Fixed dynamic BGP route state display
    • Fixed BGP peer enable in edit page
    • Fixed issue when no L2TP client instance could be bound to IPsec
    • Fixed firewall rule and zone behavior related to config section creation
    • Added default value for L2TPv3 netmask, which is now written to config after save
    • Fixed passthrough option saving to IPsec file
    • Fixed DMVPN issue where instance configuration could not be saved
    • Fixed Wireguard peer could not be saved issue
    • Fixed NTP client time synchronization after factory reset
    • Fixed device time display with selected time zone
    • Fixed MODBUS TCP indexation missing bracket issue
    • Fixed initial MODBUS TCP request count validation
    • Fixed PIN 3/4 direction switching over MODBUS TCP
    • Fixed MODBUS data to MQTT socket closing issue when connection fails
    • Fixed MODBUS alarm configuration deletion
    • Fixed DNP3 master not working after FW upgrade with 'keep settings'
    • Fixed DNP outstation not returning error messages
    • Added missing SNMP objects: mobile IP, data sent/received today
    • Fixed MQTT Publisher 'Remote address' field validation
    • Fixed long interface name support for Azure IoT Hub
    • Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
    • Fixed missing sent/received data issue
    • Fixed URL input field length validation
    • Fixed admin login issue after upload of backup from a device with older firmware versions
    • Fixed MAC address formatting in Events reporting messages
    • Fixed Events reporting DHCP lease message spam, when no new lease is added
    • Fixed logging crashing after downloading Troubleshoot file
    • Made Wake on LAN visible only on devices with Ethernet ports
    • Fixed Traffic log file transfer to FTP server
    • Fixed Web Filter service reloading after a host list file is uploaded
    • Fixed access denied messages when sending JSON-RPC requests from root user
    • Fixed error message display about duplicated intervals in Profile scheduler
    • Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
    • Corrected OSPF Routing card values, value positions and names
    • Fixed global secret instances not being removed when there are no IPsec instances
    • Fixed uploaded file remove icon not staying in position on hover
    • Fixed Overview card collapse issue that made it unresponsive after too many clicks
    • Removed WAN6 interface from the Overview page
    • Fixed mobile IPv6 display in Events Reporting status messages
    • Fixed Bridge mode when DNS2 is not available
    • Fixed PAP/CHAP username and password fields not saving in interface edit window
    • Fixed sending email without secure connection for providers that support such an option
    • Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
    • Fixed Call Utilities Events Log message for reboot rule
    • Fixed SMS command validation for no-authorization option
    • Fixed MODBUS SMS alarms 'Enable' option saving
    • Fixed running RMS with no SIM card inserted issue
    • Fixed firmware available on server version checking issue
    • Fixed CVE-2020-15078 openvpn vulnerability
    • Fixed storage calculation for packages
    • Fixed firmware deletion after leaving the page
    • Fixed setup wizard redirect after LAN IP change
    • Fixed various validation bugs, typos, option hints & alignments
    • Fixed multiple IPv6 configuration field validations
    • Fixed VoLTE management
    • Fixed incorrect parsing of temperature, revision and IP address values
    • Fixed handling of SIM card removal
    • Added multiwan support for Wireguard default route
    • Fixed wireless signal strength display when no clients are connected
    • Fixed loss of connectivity for clients when router is in STA+AP mode
    • Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
    • Fixed Wifi Scanner data not being stored in certain scenarios
    • Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
    • Fixed Hotspot user group limit not resetting on specified time
    • Removed an RMS error message when no Hotspot users were created
    • Fixed Hotspot landing page image upload issue
    • Fixed relay output value display in I/O Juggler condition page
    • Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
    • Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
    • Fixed I/O Juggler's incorrect I/O status messages

RUT2M_R_00.07.01.4 | 2022.02.25[edit | edit source]

  • Fixes
    • Fixed connection to whitelist carriers
    • Fixed Passthrough mode when DHCP is disabled
    • Fixed 'Dany data roaming' feature
    • Fixed mobile blocking dependency on region
    • Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled
    • Fixed OpenVPN server configuration with password authentication
    • Fixed NTP interval length validation
    • Fixed network interface enable after Drag & Drop
    • Updated NTP client interval to 24h

RUT2M_R_00.07.01.3 | 2022.02.15[edit | edit source]

  • New features
    • Initial FW release for the RUT241 device