RUT300 Custom Scripts
From Teltonika Networks Wiki
Main Page > RUT Routers > RUT300 > RUT300 Manual > RUT300 WebUI > RUT300 System section > RUT300 Custom Scripts
The information in this page is updated in accordance with firmware version RUT30X_R_00.07.04.3.
Summary
The User Scripts function allows users to write their own shell scripts that will be executed during the device's booting process. This page is an overview of the User Scripts function in RUT300 devices.
Startup Script
The Startup Script section shows the contents of the /etc/rc.local file and allows the user to edit it. This scripts written in this file are executed at the end of the device's boot cycle. You can also execute the script via a command line interface with the following command:
sh /etc/rc.local
The figure below is an example of the Startup Script management section:
