RUT301 SNMP

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT301 > RUT301 Manual > RUT301 WebUI > RUT301 Services section > RUT301 SNMP

The information in this page is updated in accordance with firmware version RUT301_R_00.07.07.3.


Summary

Simple Network Management Protocol (SNMP) is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in RUT301 devices.

Note: SNMP is additional software that can be installed from the System → Package Manager page.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

SNMP settings

The SNMP settings page is used to configure SNMP accessibility and general SNMP information for your device.

SNMP agent settings


Networking rutos manual snmp snmp agent settings v2.png

Field Value Description
Enable SNMP service off | on; default: off Run SNMP service on system's startup.
Enable remote access off | on; default: off Open port in firewall so that SNMP service may be reached from WAN.
IP type IPv4 | IPv6 | IPv4v6; default: IPv4 IP type used by SNMP.
Port integer [0..65535]; default: 161 SNMP service's port.
SNMP v1 Mode off | on; default: on Enable/disable SNMP v1 Mode.
SNMP v2c Mode off | on; default: on Enable/disable SNMP v2c Mode.
SNMP v3 Mode off | on; default: off Enable/disable SNMP v3 Mode.

SNMP System Summary


The SNMP System Summary section contains general information about SNMP on this device. You can also download this device's MIB file from this section.

Networking rutos manual snmp snmp system summary.png

Field Value Description
MIB file -(interactive button) Downloads the device's MIB file.
System OID 1.3.6.1.4.1.48690 OID or Object Identifier, is an identifier used to name and point to an object in the MIB hierarchy.
Location string; default: location Trap named sysLocation.
Contact string; default: [email protected] Trap named sysContact.
Name string; default: name Trap named sysName.

SNMP v3 users

The SNMP v3 users page is used to create and manage users, who can be authenticated using SNMP v3. To configure an SNMP user, you must first create it:

  1. Enter a custom name for the new user in the 'Name' field.
  2. Click the 'Add' button.
  3. Click the 'Edit' button next to the newly created user.

Networking rutos manual snmp snmp v3 users add button.png


The SNMP user configuration window should look similar to this:

Networking rutos manual snmp snmp v3 users snmp user configuration.png

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Field Value Description
Enable off | on; default: off Turns this SNMP user on or off.
Username string; default: none Set username to access SNMP.
Security level No authentication, no privacy | Authentication, no privacy | Authentication and privacy; default: No authentication, no privacy A security level is an authentication strategy that is set up for the user.

No authentication, no privacy - authenticates with a username. Authentication - provides MD5 or SHA algorithms for authentication.

Privacy - Provides DES or AES encryption.
Authentication, no privacy | Authentication and privacy: Authentication type SHA | MD5; default: SHA Set authentication type to use with SNMP v3.
Authentication, no privacy | Authentication and privacy: Authentication passphrase string; default: none Set authentication passpharse to generate key for SNMP v3.
Authentication and privacy: Privacy type DES | AES; default: DES Set privacy type to use with SNMP v3.
Authentication and privacy: Privacy passphrase string; default: none Set privacy passpharse to generate key for SNMP v3.
Access Mode Read-Only | Read-Write; default: Read-Only The access mode specifies the access the hosts in the community are allowed with respect to retrieving and modifying the MIB variables from a specific SNMP agent.
MIB subtree string; default: none Leave empty to access full MIB tree.

Communities

The SNMP Community section is used to manage access rights. You can edit an SNMP community by clicking the 'Edit' button next to it:

Networking rutos manual snmp communities edit button v1.png

This will redirect you to the community's configuration page.

Networking rutos manual snmp communities snmp community configuration.png

Field Value Description
Community name string; default: none Name of the community.
IP Address ip; default: none IP address of the community.
IP Mask ip; default: none Netmask for IP of the community.
Access Mode Read-Only | Read-Write; default: Read-Only Access mode for current community.

SNMPv6 community configuration page:

Networking rutos manual snmp communities snmpv6 community configuration v2.png

Field Value Description
Community name string; default: public Name of the community.
Source ip6 | domain name; default: default Source of the community.
Access Mode Read-Only | Read-Write; default: Read-Only Access mode for current community.

Trap Settings

SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status request from the manager.

Trap settings page is divided in two sections - Trap service settings and Trap rules. Trap service settings lets you manage hosts which will get configured alert messages, Trap rules lets you manage rules which when triggered will send alerts.

Trap Service Settings


The Trap Service Settings is used to manage hosts which will be alerted when an SNMP trap is triggered. The host list is empty by default thus, to begin configuration you must first create at least one host.

Click the 'Add' button at the bottom-right side of the table to create a new host.

Networking rutos manual snmp trap settings trap service settings add button.png

The newly added Host configuration should look similar to this:

Networking rutos manual snmp trap settings trap service settings configuration.png

Field Value Description
Host/IP url | ip; default: none Hostname or IP address to transfer SNMP traffic to.
Port integer [0..65535]; default: 162 Trap host's port number.
Community string; default: Public Name of the community to which the trap belongs.
Delete - (interactive button) Deletes the host next to the button.
off/on slider off | on; default: off Turns the host on or off. SNMP traffic is only sent to enabled hosts.

Trap Rules


SNMP Trap Rules are alerts that trigger when certain user-specified events occur. When the trigger event happens, the trap will notify known SNMP hosts.

You can create a new trap rule by clicking the 'Add' button.

Networking rutos manual snmp trap settings trap rules add button.png

You should be redirected to the rule's configuration page which should look something like this:

Networking rutos manual snmp trap settings trap rules modify trap rule mobile 0.png

Above is an example of what rule configuration window looks like. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean.

To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.



Input/Output


field name value1 description
Enable off | on; default: off Enable or disable this rule.
Action Input/Output trap Rule will be triggered when specified input or output state will change.

Events log


Event Event subtype Description
Config change All | Specific config change; default: all Informs on changes to the device's configuration.
Reboot All | From Web UI | From ping reboot | From reboot scheduler | From button; default: All Informs on if the device was rebooted.
Startup Device startup completed Informs on when the device is fully booted.
New DHCP client All | Connected from LAN; default All Informs on new DHCP lease give outs.
Ports state All | Link speed | Link state | Unplugged | Plugged in | Specific port; default: All Informs on Ethernet port state (plugged in or unplugged) or speed (100 Mbps or 1000 Mbps) changes.
Reboot All | From button | From Input/Output | From Ping Reboot | From Reboot Scheduler | From WebUI | From SMS; default: All Informs after device reboot occurrences.
SSH All | Successful authentication | Unsuccessful authentication; default: All Informs on successful or unsuccessful SSH login attempts.
Topology state Topology changes Informs on changes to the device's network topology.
WebUI ALL | Successful authentication | Unsuccessful authentication; default: All Informs on successful or unsuccessful HTTP/HTTPS login attempts.


SNMP variables list

Name OID Description
Device
serial .1.3.6.1.4.1.48690.1.1.0 Device serial number
routerName.0 .1.3.6.1.4.1.48690.1.2.0 Device name
productCode .1.3.6.1.4.1.48690.1.3.0 Device product (ordering) code
batchNumber .1.3.6.1.4.1.48690.1.4.0 Device batch number
hardwareRevision .1.3.6.1.4.1.48690.1.5.0 Device hardware revision
fwVersion .1.3.6.1.4.1.48690.1.6.0 Device RutOS firmware version
deviceUptime .1.3.6.1.4.1.48690.1.7.0 Device uptime
Mobile notifications
signalChangeNotification .1.3.6.1.4.1.48690.4.1.1 Signal strength trap
networkTypeNotification .1.3.6.1.4.1.48690.4.1.2 Network type trap
Input/Output notifications
digitalio0Notification .1.3.6.1.4.1.48690.4.2.3 Digital I/O 0 trap
digitalio1Notification .1.3.6.1.4.1.48690.4.2.4 Digital I/O 1 trap
Hotspot Notifications
clientConnectedNotification .1.3.6.1.4.1.48690.4.3.1 Hotspot client connected trap
clientDisconnectedNotification .1.3.6.1.4.1.48690.4.3.2 Hotspot client disconnected trap
Hotspot
hsState .1.3.6.1.4.1.48690.5.1.0 Current Hotspot state
hsIP .1.3.6.1.4.1.48690.5.2.0 Hotspot IP address
hsNet .1.3.6.1.4.1.48690.5.3.0 WiFi interface ID
hsAuth .1.3.6.1.4.1.48690.5.4.0 Hotspot authentication type
hsSessionCount .1.3.6.1.4.1.48690.5.5.0 Hotspot current active session (connected user) count
Hotspot Sessions
hssIndex .1.3.6.1.4.1.48690.5.6.1.1.1 Connected Hotspot user indexes
hssMAC .1.3.6.1.4.1.48690.5.6.1.2.1 Hotspot user MAC addresses
hssIP .1.3.6.1.4.1.48690.5.6.1.3.1 Hotspot user local IP addresses
hssID .1.3.6.1.4.1.48690.5.6.1.4.1 Hotspot user session unique IDs
hssUsername .1.3.6.1.4.1.48690.5.6.1.5.1 Hotspot connected user usernames
hssState .1.3.6.1.4.1.48690.5.6.1.6.1 Hotspot user session states
hssDwLimit .1.3.6.1.4.1.48690.5.6.1.7.1 Hotspot user download limits
hssUpLimit .1.3.6.1.4.1.48690.5.6.1.8.1 Hotspot user upload limits
hssTimeLimit .1.3.6.1.4.1.48690.5.6.1.9.1 Hotspot user session time limit
hssIdleTimeout .1.3.6.1.4.1.48690.5.6.1.10.1 Hotspot user maximum idle timeout values
hssDwBandwidth .1.3.6.1.4.1.48690.5.6.1.11.1 Hotspot user maximum download speed
hssUpBandwidth .1.3.6.1.4.1.48690.5.6.1.12.1 Hotspot user maximum upload speed
hssURL .1.3.6.1.4.1.48690.5.6.1.13.1 Hotspot URL
Input/Output
ioCount .1.3.6.1.4.1.48690.6.1 Count of I/O
ioTable .1.3.6.1.4.1.48690.6.2 A list of I/O. The number of entries is given by the value of ioCount
ioEntry .1.3.6.1.4.1.48690.6.2.1 An entry containing information of a particular I/O
ioIndex .1.3.6.1.4.1.48690.6.2.1.1 A unique value, greater than zero, for each session
ioSystemName .1.3.6.1.4.1.48690.6.2.1.2 The name of the I/O
ioName .1.3.6.1.4.1.48690.6.2.1.3 The name of the I/O, as displayed in WebUI
ioType .1.3.6.1.4.1.48690.6.2.1.4 A description of I/O type
ioBidirectional .1.3.6.1.4.1.48690.6.2.1.5 Is I/O bidirectional?
ioState .1.3.6.1.4.1.48690.6.2.1.6 State of I/O
ioInput .1.3.6.1.4.1.48690.6.2.1.7 Is I/O an input?
ioInverted .1.3.6.1.4.1.48690.6.2.1.8 Is value of I/O inverted?
ioCurrent .1.3.6.1.4.1.48690.6.2.1.9 Current amount flowing though ACL
ioPercentage .1.3.6.1.4.1.48690.6.2.1.10 Percentage of ACL
ioStateNumeric .1.3.6.1.4.1.48690.6.2.1.11 Numeric state of I/O
Port based vlan
pVlanCount .1.3.6.1.4.1.48690.8.1 Amount of port-based virtual networks
pVlanTable .1.3.6.1.4.1.48690.8.2 A list port-based virtual networks
pVlanEntry .1.3.6.1.4.1.48690.8.2.1 An entry containing information about a port-based VLAN
pVlanIndex .1.3.6.1.4.1.48690.8.2.1.1 The index of the port-based VLAN
pVlanNum .1.3.6.1.4.1.48690.8.2.1.2 The vlan number of the port-based VLAN
pVlanPorts .1.3.6.1.4.1.48690.8.2.1.3 The assigned ports of the port-based VLAN
pVlanVID .1.3.6.1.4.1.48690.8.2.1.4 The vlan ID of the port-based VLAN
Interface based vlan
iVlanCount .1.3.6.1.4.1.48690.8.3 Amount of interface-based virtual networks
iVlanTable .1.3.6.1.4.1.48690.8.4 A list interface-based virtual networks
iVlanEntry .1.3.6.1.4.1.48690.8.4.1 An entry containing information about an interface-based VLAN
iVlanIndex .1.3.6.1.4.1.48690.8.4.1.1 The index of an iface-based VLAN
iVlanName .1.3.6.1.4.1.48690.8.4.1.2 The name of an iface-based VLAN
iVlanType .1.3.6.1.4.1.48690.8.4.1.3 The type of an iface-based VLAN
iVlanIfName .1.3.6.1.4.1.48690.8.4.1.4 The interface name of an iface-based VLAN
iVlanVID .1.3.6.1.4.1.48690.8.4.1.5 The VLAN ID of an iface-based VLAN
Smart Queue Management
queueCount .1.3.6.1.4.1.48690.9.1 Amount of traffic shaping configs
queueTable .1.3.6.1.4.1.48690.9.2 A list of traffic shaping configs
queueEntry .1.3.6.1.4.1.48690.9.2.1 Entry containg info of a traffic shaping config
queueIndex .1.3.6.1.4.1.48690.9.2.1.1 The index of the queue
queueName .1.3.6.1.4.1.48690.9.2.1.2 The internal name of the queue
queueEnabled .1.3.6.1.4.1.48690.9.2.1.3 Is the queue enabled?
queueIface .1.3.6.1.4.1.48690.9.2.1.4 The assigned interface of the queue
queueDownLimit .1.3.6.1.4.1.48690.9.2.1.5 The download limit of the queue
queueUpLimit .1.3.6.1.4.1.48690.9.2.1.6 The upload limit of the queue
queueQdisk .1.3.6.1.4.1.48690.9.2.1.7 The queuing discipline in use for this queue
queueScript .1.3.6.1.4.1.48690.9.2.1.8 The queuing discipline setup script used in this queue
Port
portCount .1.3.6.1.4.1.48690.10.1.0 Number of ports on device
portTable .1.3.6.1.4.1.48690.10.2.0 A list of port entries. The number of entries is given by the value of portCount
portEntry .1.3.6.1.4.1.48690.10.2.1.0 An entry containing information of a particular port
pIndex .1.3.6.1.4.1.48690.10.2.1.1 A unique value, greater than zero, for each port
pName .1.3.6.1.4.1.48690.10.2.1.2 Port's name
pNumber .1.3.6.1.4.1.48690.10.2.1.3 Port's number
pPosition .1.3.6.1.4.1.48690.10.2.1.4 Port's physical position
pState .1.3.6.1.4.1.48690.10.2.1.5 Port's state
pSpeed .1.3.6.1.4.1.48690.10.2.1.6 Port's speed
pDuplex .1.3.6.1.4.1.48690.10.2.1.7 Boolean value whether port is duplex or not