RUT850 Services

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUT850 > RUT850 Manual > RUT850 WebUI > RUT850 Services

Summary[edit | edit source]

The Services page is used for easy service management. From here you can turn most of your device's services ON or OFF or restart them, without navigating to the respective section where it was originally configured.

Services[edit | edit source]

The Services table displays the status of most of the device's services. Services that are currently inactive are displayed in a grey font, while active ones are highlighted in blue.

The figure below is an example of the Services page:

Rut850 webui status services v1.png

Click the zone next to a service where it says "Disabled" or "Enabled" to turn that service ON or OFF. Click "Restart" to restart a service.

Additional notes:

  • Some services have to be configured before they can be enabled from this page. If you don't know where or how you can configure a certain service, try checking out the RUT850 Services section for guidance
  • By default, only NTP and SMS Utilities services are enabled
  • Restarting a service that is disabled does nothing
  • Some services have to be installed via Package Manager, before they can be visible.