RUT850 User Scripts

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUT850 > RUT850 Manual > RUT850 WebUI > RUT850 User Scripts

Summary[edit | edit source]

The User Scripts function allows users to write their own shell scripts that will be executed during the router's booting process. This page is an overview of the User Scripts function in RUT850 routers.

The information in this page is updated in accordance with the RUT850_R_00.01.03.4 firmware version.

Startup script management[edit | edit source]

The startup script management section shows the contents of the /etc/rc.local file and allows the user to edit it. This scripts written in this file are executed at the end of the device's start up process. You can also execute the script via a command line interface with the following command:

sh /etc/rc.local

The figure below is an example of the startup script management section:

Networking rutxxx manual user scripts v1.png