RUT956 Logging in

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT956 > RUT956 Manual > RUT956 Logging in

Configure your computer (Windows)[edit source]

  1. Enable the wireless network connection (go to Start → Control Panel → Network and Internet → Network and Sharing Center. In the left panel click the Change adapter settings link. Right click on Wireless Network Connection and select Enable).

    Qsg rutxxx enable wireless connection v2.png

  2. Setup wireless network adapter on your computer (right click on Wireless Network Connection and select Properties. After that select Internet Protocol Version 4 (TCP/IP) and click Properties).
  3. Select Obtain IP address and Obtain DNS server address automatically if they are not selected. Click OK.

    Qsg rutxxx obtain ip address automatically v2.png

  4. Right click on Wireless Network Connection and select Connect to see available wireless networks.

    Qsg rutxxx connect to wireless network v2.png

  5. Choose the wireless network RUT956_**** from the list and click Connect. Enter the WiFi password located on the device's label.

    Qsg rut955 connect to wireless ssid v2.png