RUTM52 Firmware Downloads

From Teltonika Networks Wiki
Main Page > RUTM Routers > RUTM52 > RUTM52 Firmware Downloads

This page contains firmware files for RUTM52 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUTM52 Firmware.

RUTM52

File Type Release date Size MD5 Changelog
RUTM_R_00.07.11.4_WEBUI.bin Latest FW 2024.12.19 24.38 MB 66409b7a5c33b5e43e89356e9f85117b Link
RUTM_R_00.07.11.2_WEBUI.bin Mass production FW 2024.12.09 24.38 MB c603118f8e9c61b21517ef34e5aa592e Link
RUTM_R_SDK_00.07.11.4.tar.gz SDK 2024.12.19 39.57 MB f8e33c8cfb2ede5fe64d68312713b831


Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.
RUTM52 device firmware cannot be downgraded below RUTM_R_00.07.06.1 version.

FW checksums


Checksums for firmware files can be found here.

Changelog

RUTM_R_00.07.11.4 | 2024.12.19

  • Firmware includes no changes for this device

RUTM_R_00.07.11.3 | 2024.12.17

  • Fix
    • Services
      • Input/Output: fixed issues causing fault messages on service close
      • Wireguard: fixed field validation after firmware upgrade
      • OpenVPN: fixed the certificate file selection issue in the server configuration

RUTM_R_00.07.11.2 | 2024.12.09

  • Fix
    • Services
      • IPsec: fixed loading connections using AEAD algorithms
      • IPsec: fixed connection status display
      • IPsec: fixed Local source IP option
      • IPsec: fixed issue with multiple global secrets of same type

RUTM_R_00.07.11.1 | 2024.12.02

  • Fix
    • Services
      • Hotspot: fixed limits not working for "MAC authentication", "Single sign-on" and "SMS OTP" modes
      • Ledman: fixed issue when network type LEDs are blinking when data connection is established
      • Tailscale: fixed the segmentation fault that occurred after installing the package
    • System
      • Boot: fixed not working 3G LED in bootloader

RUTM_R_00.07.11 | 2024.11.25

  • New
    • Network
      • 802.1X: added initial server support
      • Devices: added network bridge status and configuration support
      • Firewall: added "IPsec software flow offload" feature
      • NAT64: added NAT64 WebUI configuration support
    • Services
      • Data to Server: added LUA format support
      • DLMS: added option to configure which COSEM class attributes to read from the meter
      • GPS: added NMEA to serial functionality
      • Impulse Counter: added feature
      • Wireguard: added QR code configuration generator
    • System
      • Administration: added capability of displaying a configurable banner before login
      • Password Policy: added ability to modify the password policy
      • System Users: added sensitive option toggle for user groups
  • Improvements
    • Network
      • Firewall: added TCPMSS action to traffic rules
      • Mobile: improved mobile configuration reload for dual modem devices
      • Mobile: improved mobile connection checking according to serving cell connection
      • Mobile: improved manual operator selection logic to prevent unintended operator changes
      • Mobile: added 'telenor.smart' APN for 'Telenor' operator to APN database
      • Mobile: added 'telenor.fwa' APN for 'Telenor' operator to APN database
      • Mobile: removed 'internet.ventelo.no' APN for 'Telenor' operator from APN database
      • Mobile: removed 'telenor' APN for 'Telenor' operator from APN database
      • Mobile: standardized operator names on the APN database
      • Multi AP: improved switching time between APs
      • RelayD: added ability to configure multiple Relayd configurations
      • Topology: added sorting functionality for "IP address" and "MAC address" table columns
      • Wireless: changed radio status to show channel frequency in MHz instead of GHz
    • Services
      • Data to Server: added scheduler support
      • DLMS: added default values for table name columns
      • Hotspot: added MAC authentication option for SMS OTP authentication mode
      • Hotspot: added DOH and DOT addresses to default blocklist
      • IPsec: updated 'Custom option' field validation
      • IPsec: migrated to swanctl
      • Modbus Client: added phone group selection
      • Modbus Client: added email alarm action
      • OPC UA Client: changed validation, allowing to add certificates when channel encryption is not used
      • OpenVPN: improved WebUI page for creating and modifying instances
      • OpenVPN: added custom configuration file parsing
      • OpenVPN: added option to configure virtual addressing topology and support for TLS clients
      • OpenVPN: added 'adaptive' selection for the LZO parameter
      • OpenVPN: added support for multiple remote network values
      • OpenVPN: improved the selection of allowed data ciphers in the WebUI
      • OpenVPN: improved private key decryption
      • OpenVPN: removed dependency on the protocol value for configuring tunnel IPv6 addresses
      • OpenVPN: added the possibility to use multiple remote host/IP address values
      • OpenVPN: added support for exporting configuration
      • Mosquitto: updated version to 2.0.20
    • System
      • Access Control: added ability to bind HTTP and HTTPS to specific IPs and ports
      • Events Log: improved event log messages format
      • Logging: added a log ID to each log entry for easier tracking and identification
      • Setup Wizard: added SIM card and modem statuses in Mobile page
      • WebUI: updated design of tables
      • Kernel: updated version to 5.10.226
      • libffi: updated version to 3.4.6
      • readline: updated version to 8.2
  • Fix
    • Network
      • Mobile: fixed duplicate of "wap66" APN for "SFR" operator in APN database
      • Mobile: fixed duplicate of "wap68" APN for "SFR" operator in APN database
      • Mobile: fixed duplicate of "internet" APN for "TDC" operator in APN database
      • Mobile: fixed duplicate of "orangeweb" APN for "Orange" operator in APN database
      • Mobile: fixed duplicate of "wap.digicelbvi.com" APN for "Digicel" operator in APN database
      • Mobile: fixed duplicate of "wap.digicelha.com" APN for "Digicel" operator in APN database
      • Mobile: fixed duplicate of "indosatgprs" APN for "Indostat" operator in APN database
      • Mobile: fixed duplicate of "3gprs" APN for "3" operator in APN database
      • Mobile: fixed duplicate of "VZWINTERNET" APN for "Verizon" operator in APN database
      • Mobile: fixed duplicate of "soracom.io" APN for "FL1" operator in APN database
      • Mobile: fixed the USSD message when the network is not responding
      • Mobile: fixed serving cell band and bandwidth information
      • Mobile: removed voice features for EC25-AFFD module
      • Network: fixed duplicate of "pps" APN for "Zain KW" operator in APN database
      • Network: fixed MTU get from API
      • Static Routes: fixed IPv6 route target validation to accept IPv6 subnet
      • Wireless: fixed wireless not being reloaded after its interface's physical device was changed
    • Services
      • Bluetooth: fixed service crash when trying to unpair devices
      • DLMS: fixed name validation when adding physical devices
      • GPS: fixed NMEA Sentences table search
      • Hotspot: fixed Hotspot themes installation without first installing Hotspot package
      • IPsec: fixed incorrect status display when multiple instances are configured
      • IPsec: fixed flushing of connection tracking table when compatibility mode is used
      • L2TP: fixed disappearing default route when using mobile interface as the default WAN
      • Ledman: fixed the LED animation during factory reset
      • Mobile Utilities: fixed password validation when enabling SMS rule
      • Modbus Client: fixed rpc crash when calling serial.test method
      • Modbus Server: fixed firewall rule creation
      • Python3: fixed out-of-tree package compilation issue with the SDK
      • SMS Gateway: fixed long HTTP URL formatting in SMS Forwarding to HTTP
      • SMS Utilities: fixed sending messages to short numbers
      • Zerotier: fixed saving configuration when LAN interface has no associated physical interface
    • System
      • Access Control: fixed unauthorized errors on interface endpoints
      • Access Control: fixed IP Block configuration when upgrading from previous firmware versions
      • Package Manager: fixed VXLAN package not having link to configuration page
      • Package Manager: fixed restoring packages after firmware upgrade
      • Troubleshoot: fixed scenarios where TCPdump field was not displayed
      • WebUI: fixed issue when sometimes hidden sections with created instances were not displayed
  • CVE Patches
    • CVE-2021-38291
    • CVE-2024-6232
    • CVE-2024-44070

RUTM_R_00.07.10.3 | 2024.11.08

  • Initial firmware release